Pioneer AVD-W9000 - Инструкция (Страница 12)

# If you do not operate the function within about
30 seconds, the screen automatically returns to
the ordinary display.
# To return to the ordinary display, press
WIDE/MENU and hold.
Selecting the video format
When this unit is connected to an AV device,
you need to adjust the video format to suit that
AV device.
1 Press SRC/POWER and hold until the
unit turns off.
2 Press WIDE/MENU and hold to display
the setup menu.
The
SETUP MENU appears on the display.
3 Press WIDE/MENU to select VCR1 or
VCR2.
Press
WIDE/MENU repeatedly to switch be-
tween the following adjustment functions:
VCR1 [COMPONENT] (component video)
—
VCR1 (VCR1 color system)
—VCR2 (VCR2
color system)
—POWER. C (power control)
4 Press VOL DOWN or VOL UP to select
the desired video format.
Each time
VOL DOWN or VOL UP is pressed,
the video format is selected in the following
order:
AUTO
—NTSC—PAL—SECAM
# If AUTO is selected, NTSC, PAL and SECAM
are automatically identified and displayed.
# Broadcast reception may be inferior when
AUTO is selected.
# If you do not operate the function within about
30 seconds, the screen automatically returns to
the ordinary display.
# To return to the ordinary display, press
WIDE/MENU and hold.
Setting the power control function
When connecting with a head unit which has
a power control function, such as AVH-
P7900DVD, you can turn this display unit ON
or OFF using the head unit.
! When this function is set to FRONT, a
26pin component cable (e.g., CD-CP300) is
required.
1 Press SRC/POWER and hold until the
unit turns off.
2 Press WIDE/MENU and hold to display
the setup menu.
The
SETUP MENU appears on the display.
3 Press WIDE/MENU to select POWER. C.
Press WIDE/MENU repeatedly to switch be-
tween the following adjustment functions:
VCR1 [COMPONENT] (component video)
—
VCR1 (VCR1 color system)
—VCR2 (VCR2
color system)
—POWER. C (power control)
4 Press VOL DOWN or VOL UP to select
the desired setting.
Each time
VOL DOWN or VOL UP is pressed,
the following settings are selected:
! NORMAL – You can turn this display unit
on/off by pressing SRC/POWER
! FRONT – You can turn this display unit on/
off using a head unit with a power control
function
# If FRONT is selected, you cannot turn this dis-
play unit on/off by pressing
SRC/POWER.
# If you do not operate the function within about
30 seconds, the screen automatically returns to
the ordinary display.
# To return to the ordinary display, press
WIDE/MENU and hold.
Operating this unit
En
12
Section
03