Vitek VT-4110 BK - Инструкция (Страница 9)

ENGLISH
9
YUV: select this mode while connecting via Y Cb/Pb Cr/Pr jack to
component jack.
RGB: select this mode while connecting via SCART jack.
• TV MODE If you TV support progressive scan mode, you can switch
on and off progressive scan, if the YUV mode is selected
SHARPNESS, BRIGHTNESS, CONTRAST You can set the desired level
according to your preferences.
Preferences
Should be set before starting viewing
ТВ system
Your player suits for all TV systems. You can select PAL, NTSC and Auto
SOUND (Selection audio language), SUBTITLE, DISC MENU
These parameters can be set according to your preferences. If the
parameters set by you are supported by the disc, the play back will be
going with your settings. Otherwise, default settings of the disc will be
used.
PARENTAL CONTROL
This function is intended for parents to control disc content and protect
their children from watching some scenes. The disc which level is higher
than the level set by this function will not be played back
Note: While changing this item you should enter a password (default
password - 16900)
PASSWORD
You can change the password. Select PASSWORD => CHANGE =>
►,
in the appeared window enter firstly the old password (or the default
password - 16900), then enter a new password, and enter the new
password once again. Press the
► button to store the new password.
RESET
Reset – return to factory settings.
BASIC FUNCTIONS
Noteе: The symbol , appearing on the screen while pressing the
button, means, that the selected function is unavailable for this disc
POWER
• Press the STANDBY/ON button on the front panel of the player or the
POWER button on the remote control, to power on the player.
• Use the POWER button on the remote control to move to standby
mode.
OPEN/CLOSE
• Press the OPEN/CLOSE button on the front panel of the player or the
button on the remote control, the disc tray will open. Insert a disc
into the disc tray with its operating surface down (label down). Press
the OPEN/CLOSE button again, to close the disc tray and the play
back will start automatically. Auto playback function is not supported
by all discs.
VOLUME
• Use the VOLUME +/- buttons to increase or decrease the volume
level.
MUTE
• To mute press the MUTE button. To cancel the mute mode press the
MUTE button again or use volume control buttons.
PLAY
• Press the
► button on the remote control or on the front panel of the
player to start playback.
PAUSE
To pause playback, press PAUSE button on the remote control or on
the front panel of the player. To resume to normal playback press the
► button.
STOP
• While playback of DVD, SVCD, VCD, CD discs, press the STOP
button once – the player will remember the stop point. Press the ►
button on the remote control or on the front panel of the player to
continue. To completely stop the playback, press the STOP button
for the second time.
F.REV ◄◄ и F.FWD ►►
• Press the F.FWD ►► button to fast forward
• Press the F.REV ◄◄ button to fast rewind
To increase the speed, press the corresponding button for several times.
PREV I
◄◄/ NEXT ►►I
• While playback of DVD discs, press the PREV (I ◄◄) button on the
front panel or on the remote control to move to the previous episode.
• While playback of SVCD, VCD, CD discs press the PREV (I ◄◄)
button to move to the previous track
• While playback of DVD discs press the NEXT ( ►►I) button on the
front panel or the remote control to move to the next episode.
• While playback of SVCD, VCD, CD discs press the NEXT ( ►►I)
button to move to the next track.
DVD/USB/CARD (medium selection)
The unit supports the following types of cards:
MS CARD: MEMORY STICK CARD
SD CARD: SD MEMORY CARD
MMC CARD: MULTI MEDIA CARD
• Switch on the player
• Insert a card (SD, MS, and MMC)
• Use the “DVD/USB/CARD” button to switch the DVD in the card
reading mode or in the USB reading mode. (If you have connected
to the DVD different external devices, use the “DVD/USB/CARD”
button to select between them).
If the loading is successful, the navigation menu will be reflected
automatically. Use the (
↑↓) buttons to select the required folder, and
then press ► to confirm. In folders use the (↑↓) buttons to select the
required file, then press ► to playback. Use the ← button on this
page to return to the previous menu, and the ( ←→) buttons to move
to the previous or the next page.
• While playback of a disc the unit will stop.
• When the disc and the card or USB device are played back disc
playback has priority. In this case use the “DVD/USB/CARD” button
to select the corresponding medium.
• When the unit stops you can remove the device (card or USB).
• Firstly the DVD player will download a disc. Press “DVD/USB/CARD”
to select another mode.
• When a a card is read the mode is not displayed. You can press
“DVD/USB/CARD” to switch to the DVD mode.
Note
1. The manufacturer does not guarantee the support of all existing USB
devices with 1.1 and .0 interfaces.
. DVD player has been tested for compatibility with the most
frequently used parameters of recording of multimedia files. But
due to the great amount of existing and appearing parameters and
specifications, used in creation of a multimedia file, some of them
can be played back incorrect or cannot be played back.
PROG
• If the disc contains two and more tracks, episodes or titles, by
means of this button you can set order of playback.
• To enter program mode press the PROG button, program menu
will appear on the screen. Press the digital buttons to set the track,
episode or title number. To enter 10 and more use the 10+ button.
(For instance to enter 6 press the following buttons: 10+, 10+, 6)
If there more than 10 tracks, press NEXT
►► I to continue program
table (up to 0 titles are possible). Use the ( ↓→←↑) buttons to move
the cursor. After finish of programming use the navigation buttons to
select “Start” and press the
►button to playback the programmed
sequence.
• For МРЗ, DiV X, MPEG 4 discs programming is impossible! Press the
PROG button once to open the file list. Use the navigation buttons;
you can select the desired file to review.
TITLE/PBC and MENU
The TITLE/PBC and MENU buttons are used to display content of the
disc.
If there several titles (films) on the disc, to display title list press the
TITLE/PBC button. To display content of the title press the MENU
button.
If the disc contains one title press the MENU button.
While playback of SVCD, VCD.0 discs, press the TITLE/PBC button,
the disc menu will appear. In this mode you can select the track
number, by pressing the corresponding digital button. VCD1.1,
CDDA and МРЗ do not have РВС menu.
SUBTITLE
• While playback of DVD with subtitles press the SUBTTITLE button to
select the subtitle language.
ANGLE
• While playback of DVD with more than one angle press the ANGLE
button to select the required angle.
4110IM.indd 9 18.08.2008 15:05:44