Vitek VT-6405 - Инструкция (Страница 8)

English
8
Barometric pressure check
As soon as atmospheric pressure and
altitude units and the altitude value
are set, the meteorological station will
automatically switch to the tempera-
ture and humidity displaying mode.
To check the barometric pressure,
press the
PRESSURE/ALTITUDE but-
ton to display pressure indications.
Press this button once again to dis-
play altitude.
To return to the temperature and
humidity displaying, press the
▲/
MEMORY button .
Barometric pressure correction
Barometric pressure will be corrected
by means of measuring of the baro-
metric pressure or altitude.
Barometric pressure measuring
1. Press the
PRESSURE/ALTITUDE
button to display barometric
pressure indications.
. Press and hold the UNIT or
PRESSURE/ALTITUDE button to
measure barometric pressure or
its value correspondingly.
. Use the ▼/SEARCH or ▲/
MEMORY button to set the
measuring units/desired value.
. Press the UNIT or PRESSURE/
ALTITUDE button to confirm.
5. Altitude value will be changed
according to the new barometric
value.
Altitude measuring
1. Press the PRESSURE/ALTITUDE
button twice to display altitude.
. Press and hold the UNIT or
PRESSURE/ALTITUDE button
to measure altitude or its value
correspondingly.
. Use the ▼/SEARCH or ▲/
MEMORY button to set the
measuring units/desired value.
. Press the UNIT or PRESSURE/
ALTITUDE button to confirm.
5. Barometric value will be changed
according to the new altitude.
TEMPERATURE AND HUMIDITY
INDICATIONS
With every pressing of the ▲/MEM-
ORY button switching between the
displaying of the following parameters
appears:
•
Current temperature and humidity
• Minimal temperature and
humidity
• Maximal temperature and
humidity
Note: during the operation of the re-
mote sensor at the temperature below
0° C, voltage of its batteries can lower,
reducing thus the operating radius of
its transmitter.
Temperature changing tendencies
Temperature changing tendencies
are displayed as arrows (growing,
constant, falling down) near the cor-
responding data.
Data channels switching
Press the CHANNEL button to switch
between the data channels from the
remote sensors (1, , ), indoors (IN)
6405IM.indd 8 12.11.2008 11:21:13