Vitek VT-6405 - Инструкция (Страница 10)

English
10
alarm is switched off, the “OFF” symbol will be displayed.
. Press the alarm AL1 button during  seconds, hours will be flashing. Use the
+/- buttons to set the desired value.
. Hold the AL button, the symbols will start flashing. Use the +/- buttons to
set the desired value.
. Press the AL1 or AL to cancel the setup mode.
5. To switch off the alarm, press the AL1 or AL and the “-“button.
REPEAT OF ALARM SIGNAL
You can switch of the alarm signal for 8 minutes by pressing the SNOOZE button.
If you do not switch off the alarm during two minutes, it will switch automatically
to the alarm repeat mode.
Maximal quantity of repeats of the signal–  times
SPECIFICATIONS
Temperature measuring
Base unit
from -5 till +50°С
(from + till +1°F)
Remote sensor
from -15 till +60,0°С
(from 5 till +10°F)
Temperature measuring precision 0,1°С/0,°F
Relative humidity measuring
Base unit
from 5% till 90% at 5°С (77 °F)
Remote sensor from 5% till 90%
Relative humidity measuring precision 1%
Data transfer frequency  MHz
Quantity of the sensors Max.
Operation radius Max. 0 m
Power supply
Base unit
Net adapter 7,5 V DC,
 batteries “AА", 1.5 V
Remote sensor  battereis “AА"
Weight
Base unit
89 g (without batteries)
Remote unit 70 g (without batteries)
Dimensions
Base unit
90х18,9х mm
Remote sensor 56х107х mm
6405IM.indd 10 12.11.2008 11:21:13