MAXWELL MW-3553 W - Инструкция (Страница 9)

Storage
• Before taking the unit away for storage, pour out water from the water tank (2) and from the
operating chamber (5), wipe the operating chamber (5) dry.
• Do not store the unit with water in the water tank or if water remains in the operating chamber.
• Keep the humidifier in a dry cool place out of reach of children.
•
TROUBLESHOOTING
Failure Possible causes Troubleshooting
The operating indicator
is not lighting, no steam
formation No voltage, no power
supply Plug the unit
Plug in another, properly operating
device, to make sure that the socket is
in good operating condition.
The operating indicator
is lighting red, no steam
formation There is no water in the
water tank. Fill the water tank with water.
“Steam” has an
unpleasant smell New device – it is
normal Unscrew the lid of the water tank, pour
out water and leave the unit for 12 hours
in a cool dark place
Polluted or stagnant
water Unplug the unit, remove the water tank,
pour out water, wash the water tank,
and fill the water tank with boiled or
distilled water.
Small intensity of “steam”
output Polluted “sprayer” Unplug the unit and clean the sprayer.
Abnormal noise during
operation of the unit The unit is placed on
the uneven or unstable
surface Unplug the unit and even the body
of the unit or move the humidifier to
another place.
NOTE:
Non-observance of rules for cleaning the unit from mineral deposits caused by hard water may
affect the overall performance of the unit. In this case clean the unit If used water is too hard, use
household filters to purify water or mix tapping water with distilled water in proportion 1:1.
DELIVERY SET
Instruction manual – 1 pc.
Removable lid with the nozzle - 1 pc.
Removable water tank – 1 pc.
9
ENGLISH
MW_3553_Instr.indd 9 MW_3553_Instr.indd 9 14.09.2011 16:47:11 14.09.2011 16:47:11