English – Инструкция по эксплуатации MAXWELL MW-3553 W

Страница 8

Advertising

FOR HOUSEHOLD USAGE ONLY

BEFORE USING THE UNIT FOR THE FIRST TIME
• Unpack the unit and remove the packing materials. Examine the unit for damages. Do not switch

on the unit if there are any damages in it.

Note:
– if the unit was subjected to negative temperatures, before switching it on for the first time, keep it

at room temperature for 30 minutes.

– use the unit at +5 - +40°С temperature, and relative humidity less than 80%.
– water temperature should not exceed +40°С.

Before switching on the unit, make sure that the voltage of the electric network corresponds
to the operating voltage of the unit.

Using the ultrasonic air humidifier
1. Remove the lid (1) from the water tank (2).
2. Remove the water tank (2) from unit.
3. Turn over the tank (2); unscrew the lid (4), by turning it anti clockwise.
4. Fill the water tank (2) with necessary quantity of water and screw the lid (4), by turning it clock-

wise.

Note: Прозрачное окно (3) позволяет определить уровень воды в резервуаре (2).

5. Set the filled tank (2) on the body of the unit.
6. Insert the plug into the socket.
7. Switch on the unit, setting the switch (8) in the position «I», the indicator (7) will light green.
8. Regulate steam intensity by turning the regulator (6).
9. If there is no water in the water tank (2) the indicator (7) will light red
10. Set the switch (8) to the “0” position, and take the plug out of the socket. Fill the tank (2) with

water and set the filled tank on the body of the unit and switch it on.

11. Set the switch (8) to the “0” position, and take the plug out of the socket.

Clean and care
Warning: Always switch off and unplug the unit before cleaning.

Hard water causes appearance of scale on the “sprayer”(5) and in the operating chamber; it leads to
improper operation of the unit and appearance of white deposit on the interior objects. To avoid it:
• use boiled water or water, which stood for some time, water, purified by filter or distilled water;
• clean the operating chamber (5) weekly;
• change water in the water tank (2) more often.

Weekly care
• Once a week carefully wash the water tank (2) and the operating chamber (5) with a neutral

washing liquid solution. After it rinse them thoroughly with water.

• Add 5-10 drops of the cleaning agent on the “sprayer” (5); wait about 2-5 minutes. Use the brush

to remove the deposit from the surface of the “sprayer” (5).

Note:
• As a cleaning agent for the “sprayer” you can use substances for scale removal in kettles.
• Do not immerse the unit into water or other liquids.

ENGLISH

MW_3553_Instr.indd 8

14.09.2011 16:47:11

Advertising