Binatone BS-8042 - Инструкция (Страница 5)

5 55 55
ENGLISH
Note 2 : if the scale display (2) will show «Lo», this means
that the batteries are exhausted and need replacement.
Open the compartment cover (7) and carefully
remove the batteries. Observing the polarity, insert
new batteries in the appliance.
Note 3 : if after the weighing, the display (2) shows «Err»,
this means that an error occurred during the weighing
process. Repeat the weighing procedure again.
Measurement errors can occur when fat percentage is
under 3% or exceeds 50%.
Personal data input
Functional buttons (4-6) (4-6) (4-6) (4-6) (4-6) to input height, weight, sex and other
personal data are on the platform (1) (1) (1) (1) (1).
Allowable range of parameters:
!
memory: 1–10 Users,
! height: 100–220 cm,
! age:10–80 years,
! weight: 2–180 kg,
User’s number
1. Press On/Set button(5) (5) (5) (5) (5). By default, the following data will
appear on the display (2) (2) (2) (2) (2) sex, height, age. At the same time,
the User’s number will be blinking.
2. Use the button (4) (4) (4) (4) (4) to increase/ decrease User’s number.
Note : at each one-time pressing of the button (4), readings
will be increased/ decreased by one.
Sex
1. Press confirmation button (6) (6) (6) (6) (6) to confirm the User’s number
and to enter the User’s sex input mode.
2. Use the button (4) (4) (4) (4) (4) to change the User’s sex (icon of female/
male).
Height
1. Press confirmation button (6) (6) (6) (6) (6) to confirm the User’s sex and to
enter the User’s height input mode.
2. Use the button (4) (4) (4) (4) (4) to increase/ decrease the User’s height
(from 100 to 220 cm).
Age
1. Press confirmation button (6) (6) (6) (6) (6) to confirm the User’s height and
to enter the User’s age input mode.
2. Use the buttons (4) (4) (4) (4) (4) to increase/ decrease the User’s age (from
10 to 80 years).
Note : if you do not introduce any datum within 8 seconds,
the scale will switch off automatically.
Body fat/water content measurement
1. Switch on the scale by pressing On/Set button (5). (5). (5). (5). (5). The LCD
(2) (2) (2) (2) (2) will show the data set by the last weighted User.