Binatone BS-8042 - Инструкция (Страница 4)

4 44 44
Bath Electronic Scale BS-8042
DESCRIPTION OF PARTS
OF THE APPLIANCE
Picture A:
1. Tray
2. LCD display
3. Electrodes
4. Up/Down buttons
5. On/Set Button
6. Confirmation button
Picture B:
7. Battery compartment
8. Legs of the appliance
BEFORE THE FIRST USE
Before the appliance is used for the first time,
remove all packing. Insert the batteries into the
battery compartment (7) (7) (7) (7) (7) on the platform (1) (1) (1) (1) (1).
Be careful! Do not use the appliance if
you have cardio stimulators or other
electronic medical appliances inside! Make
measurements at the same time of the day as the
appliance is sensible for body water content. Always
step on with bare feet in the middle of the platform
with the electrodes.
OPERATION
Weighing
1. Place the scale on a flat solid horizontal sur-
face. Do not put the scale on carpets or other
soft coatings, since this will affect the accu-
racy of measurements.
2. To switch on the scale, press On/Set button
(5) (5) (5) (5) (5) on the platform (1) (1) (1) (1) (1) and wait till “0.0” appears on the display.
Choose the measurement — kg, lb, st by pressing Up/Down buttons
(4). (4). (4). (4). (4). Evenly distribute the weight, and stand still. Keep waiting for
several seconds, until the appliance counts the result, which will first
blinks two times on the display (2) (2) (2) (2) (2) and then fix up.
3. When measurements are over, get off from the platform (1) (1) (1) (1) (1).
The scale will automatically switch off in 8 seconds.
Note 1 : if the weight measured exceeds the permissible load
(180 kg), the display (2) will show «OL» indicating
that the permissible load has been exceeded.