Hyundai H-CMD4031 - Инструкция (Страница 11)

11
Operation
Press VOL+/VOL- buttons on the RC or rotate
VOLUME regulator on the panel to adjust the
selected item. Balance is to adjust the balance
between the left and right speakers. Fader is to
adjust the balance between the rear and front
speakers. After you have reached your desired
effect, leave the unit idle in order for the new
setting to take effect.
If the equalizer is set on, bass and treble
are not adjustable.
EQ modes
Press repeatedly SELECT button on the panel
or SEL button on the RC until the display shows
EQ OFF. Press VOL+/VOL- buttons on the RC
or rotate VOLUME regulator on the panel to
choose an equalizer effect: POP => ROCK =>
CLASS => FLAT => EQ OFF. After you have
reached your desired effect, leave the unit idle in
order for the new setting to take effect.
Loudness
Press repeatedly SELECT button on the
panel or SEL button on the RC until the display
shows LOUD ON (LOUD OFF). Press VOL+/
VOL- buttons on the RC or rotate VOLUME
regulator on the panel to select between
LOUD ON/LOUD OFF. LOUD function is to
emphasize the bass output; the word LOUD
ON indicates that the LOUD mode is on.
Clock setting
Press CLK button on the panel to show the
time on the display. Press and hold it, the hour
will be in green. Rotate VOLUME regulator on
the panel or press VOL+/VOL- buttons on the RC
to adjust the hour. Press SEL button on the RC
or SELECT button on the panel, the minute will
be in green. Rotate VOLUME regulator on the
panel or press VOL+/VOL- buttons on the RC to
adjust minutes. Press CLK button to confirm.
Beep
Press repeatedly SELECT button on the
panel or SEL button on the RC until the display
shows BEEP ON (BEEP OFF). Press VOL+/
General operations
Reset the unit
Operating the unit for the first time or after
replacing the car battery, you must reset the
unit. Press RESET button (hole) with a pointed
object, such as a ballpoint pen, to set the unit
to initial state.
When some errors occur, you can also
press RESET button to resume to normal, and
it will erase some memorized functions.
Turning the unit on/off
Press any button on the panel or the RC
(except OPEN button) to turn on the unit. Press
and hold POWER/TFT OFF button on the
panel or press POWER button on the RC to
turn off the unit.
Mode selection
Repeatedly press MOD/MUT button on the
panel or MODE button on the RC to select a
mode: Radio => Disc => USB => Memory card
=> AUX.
The Disc, Card and USB modes are
only available when corresponding storages
are connected to the unit.
Mute function
Press MUTE button on the RC or press and
hold MOD/MUT button on the panel to turn off
the sound. “MUTE ON” appears on the display.
Press the button again or adjust volume to
resume the sound output.
Volume control
Press VOL+/VOL- buttons on the RC or
rotate VOLUME regulator on the panel to
decrease or increase sound volume level.
Setting the sound characteristics
Press repeatedly SELECT button on the
panel or SEL button on the RC to select the
audio setting: VOL (volume) => BAS (bass) =>
TRE (treble) => BAL (balance) => FAD (fader).