Hyundai H-CMMD4059G - Инструкция (Страница 16)

16
Operation
RDS background
RDS service availability varies with areas.
Please understand if RDS service is not
available in you area, the following service is
not available.
AF (Alternative frequencies) function
Briefly press AF/TA button on the RC or press
and hold AF/TA button on the panel to enable
AF function. When the radio signal strength is
poor, enabling the AF function will allow the unit
to automatically search another station with the
same PI (Program Identification) as the current
station but with stronger signal strength.
AF indicator on the display will flash until
RDS information is received. If RDS service is
not available in your area, turn off the AF mode.
TA (Traffic alarm) function
Press and hold AF/TA button on the RC or
press AF/TA button on the panel to switch on
the TA function. When TA is on, the TA displays
on TFT, or else, if there is no TP information,
the mode will search TP station automatically.
When TA is playing, the volume will be adjusted
to a TA level automatically. When other modes
are activated (such as DVD, AUX), if a TA
program is played the mode will skip to the
RDS mode automatically. It will resume to the
primary mode after the TA is over.
Program type (PTY)
Press PTY button on the RC or on the panel
to activate the PTY function, press it repeatedly
to show Music group/Speech group/PTY off.
Choose the needed PTY type by pressing the
icon in the touchable screen or pressing the
corresponding number buttons on the RC.
When PTY search is on, and the selected type
matches, PTY information is displayed. If PTY
code is different or not available, PTY NONE
icon will blinks, PTY engaging automatically
exit to normal mode.
the nearest station upwards.
Band selection
Press BAND/RDM button on the RC or
BND/P.SCN button on the panel to switch to
the bands in the following order: FM1 - FM2 -
FM3 - MW1 - MW2.
Manual/automatic tuning
• Manual tuning: press / buttons on
the panel or SEEK-/ and SEEK+/ on the
RC and hold for 2 seconds to enter the manual
tuning mode. Press these buttons repeatedly to
select a frequency downward or upward step
by step.
• Automatic tuning: press / buttons
on the panel or SEEK-/ and SEEK+/ on
the RC, the automatic search will start. It will
play when finds the station.
Programming tuner stations
There are 6 numbered preset buttons on
the RC, with which you can store and recall
stations for each band (18 FM, 12 MW). Select
a station, then press and hold a preset button.
The station will be saved in the memory under
the corresponding number. To recall a stored
station, press the corresponding preset button.
Auto memory store/Preset scan
Auto store: Select a band, press and hold
BAND/P.SCN button on the panel or P.SCN/
RPT button on the RC to enter auto store mode.
The radio will automatically store 6 stations to
the 6 preset memories of the current band. To
stop auto store, press the button again.
During auto station preset, the unit will
search and store stations with the strong signal
first, and then weaker signal stations until the
memories are full.
Preset scan: Select a band, press BAND/P.
SCN button on the panel or P.SCN/RPT button
on the RC to scan all preset stations in the
memories of the current band. To stop preset
scan, press the button again.