Hyundai H-CMMD4059G - Инструкция (Страница 14)

14
Operation
After selecting a menu page you can navigate
in the menu by pressing cursor buttons on the
RC and confirm your selection by pressing
ENTER button on the RC. Menu subpages are
selected by pressing
/ buttons on the
RC. Or touch the items on the screen to select
them.
Sound page
Sound setting is described in details in
paragraph “Setting the sound characteristics“
above.
Display page
Page 1
• Brightness: adjust the display brightness.
• Auto panel: turn on/off the automatic
opening of the monitor when the unit is turned on.
Page 2
• Dual: Select ON or OFF the Dual zone
function.
• Key: Use buttons at FRONT (buttons
perform operations for the current mode of the
front zone) or REAR (buttons perform DVD
functions). This function is available only if ON
is selected for DUAL.
Date and Time page
• Date: set current year, month and date.
• Time: set current time.
RDS and Radio page
Page 1
• Stereo: Select STEREO (stereo reception
mode) or MONO (mono reception). When the
received stereo signal is weak, switch to mono
mode to improve the signal. The function is
available only in FM bands.
• DX: Select LOCAL (only local station
reception) or DX (local and distant station
reception).
• TA: Seek/Alarm. In TA SEEK mode, the
unit will seek for traffic announcement program
when TA is pressed; in TA ALARM mode, no
TA/TP is displayed and the alarm is set off.
Page 2
• EON TA: DX/Local. If you want to receive
information from local stations only, select
EON TA Local mode. Otherwise, select EON
TA DX mode.
• REG: REG ON (the receiver accepts
regional variants of the tuned station with REG
icon turned on), and REG OFF (the receiver
ignores regional variants).
• PI: Mute/Sound. PI sound refers to the
reception noise when the AF function tries to
scan alternative frequency.
• Retune: RETUNE refers to the time period
the unit allows for radio scan when reception is
interrupted. “SHORT” represents a time period
of 30 seconds and “LONG” represents a time
period of 90 seconds.
• Mask: DPI/ALL. During MASK DPI mode,
the unit will mask only the AF which has
different PI, this is the default mode; during
MASK ALL mode, the unit will mask the AF
which has different PI and no RDS signal with
high field strength.
Page 3
• Radio Area: Select the radio broadcast
area (Europe/USA/ASIA/SOUTH AMERICA).
System page
In this menu you can see the current version
information.
Calibration page
“Carefully press and hold stylus on the
center of the target. Repeat as the rarget
moves around the screen” is displayed. Touch
and hold the cross in each position until it
moves to a different position. After repeating
it 4 times, the calibration of the screen is
complete; touch the screen anywhere to return