Kenwood DF420 - Инструкция (Страница 5)

before using for the first time
1 Read these instructions and retain.
2 Remove all packaging and any labels.
3 Wash the parts - see ‘to dismantle and cleaning’.
safety
● Never plug in the fryer before filling the bowl with oil.
● Keep children away during use and after - oil stays hot
for a long time.
● Never let the cord touch hot surfaces or hang down
over the worktop edge - a child could grab it and pull
the fryer down. Place excess cord in cord storage area
at the back of the fryer.
● Never touch the bowl, pour away oil or move your fryer
while the oil’s hot.
● After cleaning, ensure all parts are completely dry
before use.
● Never leave your fryer on unattended.
● This fryer is not intended for use by young children or
infirm persons without supervision.
● Young children should be supervised to ensure that
they do not play with this appliance.
● Do not use if there is any damage to the fryer, cord or
plug. Get it checked or repaired: see ‘service’.
● Watch out for steam during cooking and when you
open the lid.
● Never put your fryer near or on cooker hot plates.
● This fryer is for domestic use only.
● Always unplug the fryer after use.
before plugging in
● Make sure your electricity supply is the same as the
one shown on the underside of the electrics unit.
● This machine complies with European Economic
Community Directive 89/336/EEC.
know your Kenwood fryer
ቢ removable lid with permanent mesh filter
ባ viewing window
ቤ lid seal
ብ condensation trap
ቦ rise and fall control
ቧ pouring lip
ቨ fixed bowl
ቩ lid release
ቪ temperature control with neon light
ቫ removable timer
ቭ carrying handles
ቮ cord storage
to dismantle, assemble and use
your fryer
to dismantle
1 Push the lid release
ቩ down to open the lid. Then lift
the lid off.
2 Lift up the handle and remove the basket.
to assemble and use
1 Pour in the oil. The level must be between the ‘MAX’
and ‘MIN’ marks .
2 Insert the basket and close the lid. Then lower the
handle by sliding back the rise & fall control .
3 Plug in and select the required temperature
ቪ.
4 The light goes out when the oil reaches the right
temperature to start frying. Fill the basket and lower
into the oil. Don’t exceed the maximum food
quantities stated. The light will come on and off as
the fryer maintains the temperature.
5 Set the timer
ቫ by pressing the button until the
required time is reached. The time will start counting
down as soon as the button is released. See “operating
the timer”.
6 When ready, raise the basket and allow the food to
drain before opening the lid.
● To re-use oil, allow to cool then pour the oil through fine
muslin or absorbent paper.
● Always unplug the fryer after use.
2