Yamaha RX-V465 - Инструкция (Страница 46)

44
En
Operating various settings for this unit (Setup menu)
Auto
Enables manual fine adjustment of the correction time
when “HDMI Auto” is set to “On.”
Manual
Manually adjusts the correction time. Select this when the
connected monitor does not support the automatic lip-sync
function or you set “HDMI Auto” to “Off.”
You can set various items for HDMI and display.
You can set items for HDMI.
■ Standby
Selects on or off of output of HDMI signals input from the
HDMI IN jack to the HDMI OUT jack when this unit is on
standby. When this parameter is set to “On” signals input
from the HDMI 1-4 jacks can be output to a monitor
component.
y
• To enables pass-through output, any one of the input sources connected
to the HDMI1-4 must be selected before switching to standby.
• When “Standby Through” turns on, the HDMI THROUGH indicator on
the front panel display lights up. While the indicator lights up, it
consumes 1 to 3W of power depending on a condition of an HDMI signal
passing through this unit.
■ Audio
Selects this unit or a component connected to this unit via
the HDMI OUT jack of this unit for reproducing sound
signals input from the HDMI IN jack.
Note
• When “TV” or “Amp+TV” is selected, signal formats of audio and visual
signals output from this unit to the monitor vary depending on
specifications of the monitor.
You can set items for the front panel display.
■ Dimmer
Sets brightness of the front panel display. As the value is
lowered, the brightness of the front panel display is
darkened.
Note
• The brightness of display does not become bright in direct mode even if
the value is increased.
■ FL Scroll
Selects the way to scroll the screen when a total number of
characters exceed a display area of the front panel display.
You can set items for volumes.
■ Adptv DRC
Adjust the dynamic range in conjunction with the volume
level. This feature is useful when you are listening at
lower volumes or at night. When this function is enabled,
the dynamic range is adjusted as follows.
If the VOLUME setting is low:
the dynamic range is narrow
If the VOLUME setting is high:
the dynamic range is wide
y
• The Adaptive DRC setting is effective for headphones.
Adjustable range: 0 to 240ms (1 ms step)
Adjustable range: 0* to 240ms (1 ms step)
Function Setup
1 HDMI
Choices: On/Off*
On Outputs the HDMI signals to the HDMI OUT
jack.
Off Not output the HDMI signals to the HDMI
OUT jack.
Choices: Amp*/TV/Amp+TV
Amp Outputs HDMI sound signals form the
speakers connected to this unit.
TV Outputs HDMI sound signals from the
speakers of a TV connected to this unit.
Sound output from the speakers connected to
this unit is muted.
Amp+TV Outputs HDMI sound signals from the
speakers connected to this unit and the
speakers of a TV connected to this unit.
2 Display
Adjustable range: -4 to 0*
Choices: Cont*/Once
Cont Repeatedly displays all characters by
scrolling.
Once Displays all characters by scrolling once,
halts scrolling, and then displays first 14
characters.
3 Volume
Choices: Auto/Off*
Auto Adjusts the dynamic range automatically.
Off Not adjust the dynamic range automatically.
VOLUME: high VOLUME: low
Input level Input level
Output le
vel
Output le
vel Auto
Off Off
Auto