Fig. 12b – Инструкция по эксплуатации Petsafe Petporte Smart Flap® Microchip Cat Flap

Страница 112

Advertising

112 www.petsafe.net

Fig. 9

Fig. 10a

Fig. 10b

Fig. 11

Fig. 12a

Fig. 13

Click the small cover plate back
over the interior section.

Power up the Petporte smart flap

program in your cat as shown on
page X, and pass the Petporte smart
flap

over your cat at a distance that

your cat would normally approach it
to check that will work for your cat.

Alternatively you can hold the
Petporte smart flap

in an inverted

orientation for the purpose of
programming your cat’s microchip.

When fitting the Petporte smart
flap

into an opening offer the

interior section with Extension
Tunnel if needed up to the opening.
Next pass the porch cable from the
porch and exterior section through
the rectangular opening in the
interior section.

Attach the porch cable to the
electronics board and hold the exterior
and interior sections together using
the two M6 screws. Tighten the screws
to hold the Petporte smart flap

in the

desired position within the opening.

Once positioned, attach the large
cover plate and secure with the four
self-tapping fixing screws. Click in
place the small cover plate. Place
all of the blanking plugs, four small
ones for the self-tapping fixing screws
and two large blanking plugs for the
M6 screws. Finally, power up your
Petporte smart flap

Fig. 12b

Advertising