English – Инструкция по эксплуатации Vitek VT-3951 B

Страница 9

Advertising
background image

ENGLISH

9

TROUBLESHOOTING GUIDE
Improper usage is always the case of trouble. If you consider that there is something wrong with the
unit, check possible causes in this table.
If you have not managed to solve the problem, apply to the nearest authorized service center or to
the dealer for repair.

Problem

Possible cause

Solution

No sound

Zero level of volume

Adjust volume level

No power

Check the power supply

Improper operation of the
LCD-display

Electrostatic electricity

Switch off the unit and switch it
on in a while

Bad sound quality while
playback of a cassette

The heads are dirty

Wipe the heads

METAL or CHROME cassette type is used Use only NORMAL (IEC I)

cassette type

No recording

Recording locking is removed

Stick the hole with the isolating
tape

Noise while listening to radio
stations in FM or AM band

The station is not tuned
FM band: the aerial is not extended
АМ band: the unit is out of reception area
or in the unstable receipt area

Tune the station
Extend the aerial
Try other location variants

The cassette recorder does
not playback stations in FM or
AM band

Radio mode is not switched on

Set the operating mode switch
to the RADIO position

No disc indication / Disc is not
played back

Disc playback mode is not switched on

Switch on the disc playback
mode

Disc is absent or set improperly

Check the disc, it should be
placed with its label down

CD-R disc is empty or not finalized

Use a finalized CD-R disc

Condensation on the optical system

Wait for a while

Some tracks cannot be played
back

Disc is scratched or dirty

Wipe the disc with a soft cloth,
do not use the damaged discs

Disc is in its place but tracks
cannot be played back

Disc is placed improperly

Check the disc, it should be
placed with its label up

Disc is scratched or dirty

Wipe the disc with a soft cloth,
do not use the damaged discs

Improper disc format

Use discs with corresponding
format

USB-device
No playback

USB playback mode is not switched on

Switch on the USB playback
mode

USB-device is not inserted into the jack or
it does not contain MP files

Check, whether the USB-
device is inserted or not and
that it contains MP files

Broken playback

The unit contains МР files
with byte rate more than 256
Kbit/sec.

Delivery set:
Cassette recorder –  pc.
Power cord – pc.
Remote control – pc.

3951IM.indd 9

19.05.2008 15:20:30

Advertising