Panasonic ES-LA93 - Инструкция (Страница 9)

9
English
7. Dry the outer foil section and
the shaver completely.
8. Attach the outer foil section to
the shaver.
9. Lubricate the shaver.
Cautionforturbomode
Shaving in turbo mode may damage your skin. Turn the shaver
off and then on again to cancel turbo mode.
Do not place your fingers on the OFF/ON switch while using
the shaver. This may cause the shaver to turn off or enter turbo
mode. •
•
Lubrication
To maintain shaving comfort for a long time, it is recommended
that the oil provided with the shaver is used.
1. Switch off the shaver.
. Apply one drop of oil to each of the outer foils.
3. Raise the trimmer and apply a drop of oil.
. Switch the shaver on, and run it for approximately five
seconds.
5. Switch off the shaver, and wipe off any excess oil from the
outer foils with a soft cloth.
It is not necessary to oil the blades after using the self-cleaning
recharger (lubricant is included in the cleaning detergent). •
Replacingthesystemouterfoilandtheinner
blades
appears on the LCD panel once a year. (This will differ
depending on usage.) We recommend checking the system outer
foil and the inner blades when it appears.
Press the OFF/ON switch for more than 30 seconds to delete .
system outer foil once every year
inner blade once every two years
Replacingthesystemouterfoil
1. Press the foil frame release
buttons and lift the outer foil
section upwards as illustrated.
. Press the system outer foil
release buttons and pull down
the system outer foil as
illustrated.
3. Align the foil frame mark
and the system outer foil
mark and securely attach
together.
The system outer foil cannot
be reversely attached.
Always insert the system
outer foil to the foil frame
when attaching to the shaver.
. After turning the mark to
the front, securely attach the
outer foil section to the shaver
until it clicks.
•
•
2 3
•

ES-LA93_CIS.indb 9 2010/01/06 16:44:51