Binatone HB-7333 - Инструкция (Страница 5)

5
ENGLISH
! Do not dismantle the appliance as improper assembly might
result in an electric shock during the subsequent use of the
equipment.
! Repairs should only be done by authorized service centers.
! This equipment is intended for household use only, not for
commercial or industrial use.
! Please follow all the requirements of this guide.
! Do not use the appliance if it has mechanical defects (dents,
cracks etc.), get it checked by the nearest authorized service
center.
! To avoid mechanical defects and damage, take care during
the appliance transportation.
SPECIAL PRECAUTIONS
! Before turning the appliance on for the first
time, make sure that all components of the
blender have been properly installed.
! Do not apply too much force when installing
the blender attachment, as it may result in the
breakage of the appliance and in the termina-
tion of the warranty.
! If a smell of burning, foreign sounds or power reduction occur
during the blending process, immediately unplug the appliance
from the outlet and clean the blender. If the blender still mal-
functions after cleaning, contact an authorized service center.
! It is recommended that original factory packaging should be
used for the transportation of the blender in order to prevent
its parts from breaking.
! If the ingredients are hot, allow them to cool before blending
(maximum temperature: 80°C). Never blend hot fat or oil with
the blender.
! Never use the blender to blend paints or solvents.
! Do not attempt to remove any ingredients when the blender is
in operation.
! Always turn the appliance off before removing the attach-
ment.
! Maximum allowed time of blender continuous operation – 1
minute with compulsory pause of not less 1 minute. Operating
time for solid products processing should not exceed 15 sec-
onds.
! The blades of the blender are very sharp. Never touch the
blades of the blender.
! Turn the blender on only after it has been fully assembled.
Always check whether the appliance has been properly as-
sembled before each use.
! During the operation of the electrical appliance, it’s not al-
lowed to push in products, using fingers or any other foreign
objects. Use only special pushrod for this purpose (16).