Binatone HB-735 - Инструкция (Страница 6)

6
INSTRUCTIONS FOR USE
Use of blender and whisk
1. Install selected whisk or blender (4,5) by
moving it anticlockwise to the body (1 ) until
tightened. To disassemble just turn in the ad-
verse direction.
2. Before turning on, please, make sure that
whisk or blender (4,5) is inserted correctly!
3. Plug the appliance into the mains.
4. Lower whisk or blender into the bowl with the product to be
processed or into the blending glass (11).
Note: blades of blender (4) should be completely plunged
into the processed product in order to prevent
sputtering.
5. To switch on the appliance, push desired speed mode using
speed buttons (2,3). Keep the button pressed while the appli-
ance is operating.
6. To stop hand blender operation release the speed button (2,3).
7. Unplug the appliance from the mains after use.
8. The appliance can be used with any bowls or containers.
Use of mincer
1. Mincer bowl is suitable for mincing meat, cheese, onions, herbs,
garlic, carrots, nuts etc. and to prepare fruit, vegetable and
alcoholic beverages, mash, liquid dough etc. Before mincing,
cut the product into smaller parts, remove shell, bones, ten-
dons and cartilage.
2. Install mincer blade (8) into the bowl (9).
3. Place products into the mincer bowl (9).
Note: when processing solid products the bowl must only be
2/3 filled!
4. Install the mincer gear (6) on the bowl (9).
5. Place the body of appliance (1) on mincer gear (6) and turn it
clock wise until tightened.
6. Prior to switching on the appliance, make sure that the gear
(6) is properly installed!
7. Plug the appliance into the mains.
8. Select desired speed using speed buttons (2,3). Keep the
button pressed while the appliance is operating.
9. Unplug the appliance from mains after use.
BEFORE USE
Unpack the appliance and wash blender,
whisks (4, 5), blade (8) and bowl (9), wipe
appliance body (1) and power cord (10) of
the appliance with moisturized fabric and then
wipe them dry.