Binatone SI-5000 - Инструкция (Страница 9)

9
ENGLISH
USEFUL TIPS
Selection of temperature settings
! Before ironing, we recommend that you orga-
nize your clothes, into the types of material
and the recommended temperature settings.
! We recommend that you start ironing, using
the lower temperature settings first: the appli-
ance gets hot quicker than it cools down.
! When ironing articles made with combinations of fibers, start
with the temperature recommended for the most delicate mate-
rial first (for example, to iron a cloth made of cotton and polyes-
ter select the temperature recommended for ironing polyester
first).
! If the manufacturer’s label, which gives the recommended
temperature, is missing and the type of material is known,
follow the recommendations below.
Fabric type Display Fabric Settings Steam ironing
Acrylic
Polypropylene
Акрил No
Polyethane
Acetate
Triacetate
Polyester
Polyamide
Шелк No
Nylon
Viscose
Silk
Wool
Шерсть No
Cotton Хлопок Yes
Linen Лен Yes
! If you do not know the fabric type, find a place on the article;
which will not be seen and test iron it to select the appropriate
temperature, start with the minimum setting.
Ironing of selected fabrics
! Do not use the Spray mode while ironing silk articles: drops of
water leave spots on silk garments.
! Wool, velour, velvet and similar pile fabrics must be ironed on
the inside.
! To prevent shiny marks we recommend that you iron woolen
articles through a thin cotton cloth, use the Spray mode.