Binatone SI-5000 - Инструкция (Страница 5)

5
ENGLISH
! Do not allow the cord or the machine itself to come in contact
with hot surfaces.
! Position the appliance and the cord so that nobody can acci-
dentally overturn it.
! Do not use the appliance if it has been dropped, or it has a
damaged power cord or plug. Do not modify or repair the
machine yourself.
! Do not dismantle the appliance as improper assembly might result
in an electric shock during the subsequent use of the equipment.
! Repairs should only be done by authorized service centers.
! This equipment is intended for household use only, not for
commercial or industrial use.
! Please follow all the requirements of this guide.
! Do not use the appliance if it has mechanical defects (dents, cracks
etc.), get it checked by the nearest authorized service center.
! To avoid mechanical defects and damage, take care during
the appliance transportation.
SPECIAL SAFETY MEASURES
! Do not leave the hot iron in a horizontal posi-
tion: place it upright on a heat resistant surface.
! The iron gets hot when in operation: any skin
contact with metal surfaces, vapor or water
may result in burns.
! During operation of the appliance keep children
away from it especially when steam ironing.
! Never iron or steam iron articles being worn by a person.
! Avoid any contacts between the sole plate and plastic fittings
of an article: buttons, zippers, labels, etc.
! Always disconnect the iron from the mains when filling or drain-
ing the water tank.
! Store the iron in a vertical position to avoid damaging the sole
plate.
! The iron should always be connected to a grounded main
electricity supply.
DESCRIPTION
OF COMPONENTS
Figure A:
1. Casing
2. Handle
3. Water inlet opening
4. Water tank cover
5. Water tank with maximum limit mark
6. Spray nozzle
7. Select Knob
8. Display
9. Display Fabric Settings (Figure B)
10. Color Changeable indicator
11.Iron sole plate