Operation – Инструкция по эксплуатации Hyundai H-CMD7080

Страница 14

Advertising
background image

14

Operation

panel to turn on AF function. If the AF function
is on, the display will show “AF”.

When the radio signal strength is poor,

enabling the AF function will allow the unit to
automatically search another station with the
same PI (Program Identification) as the current
station but with stronger signal strength, so that
you do not have to retune the stations when
driving between different transmitter coverage
areas. When AF symbol is on, it means RDS
information is received; when AF symbol is
flashing, it means RDS information is not yet
received. If RDS service is not available in your
area, turn off the AF mode.

TA (Travel Announcement) / TP

(Travel Program Identification)

Enable or disable TA mode by pressing and

holding OK button on the front panel. Default
setting is OFF.

When TA function is activated, it will search

the station with TA information automatically.
If there is no TA information, it will search the
station with TP information automatically, if
there is no TP information either, it will return to
the previous station after searching.

When receiving the station with TP

information but without TA information,
TP icon is on and TA icon keeps blinking;
when receiving the station with TP and TA
information, both TP and TA icons are on.

When playing in other mode and TA

information is received, it will change to the
radio mode automatically. After playing over, it
will return to the previous mode.

PTY (Program Type) (for FM radio)

This radio will allow you to select the type of

program required, and will search for a station
broadcasting that type of program.

Press PROG/PTY button on the RC to

show the music type. Then press 1 - 6 number
buttons to choose different music programs
available.

Press PROG/PTY button on the RC twice to

show the speech type program. Then press 1
- 6 number buttons to choose different speech

programs. Each number button will show 3
different speech programs for you to choose
(see table below).

Button

Music group

Speech group

1

Pop, Rock

News, Affairs,

Info

2

Easy, Light

Sport, Educate,

Drama

3

Classics,

Other

Culture, Science,

Varied

4

Jazz, Country

Weather,

Finance, Children

5

Nation, Oldies

Social, Religion,

Phone IN

6

Folk

Travel, Leisure,

Document

When PTY is selected, the radio starts to

search corresponding PTY information, and
stops if the corresponding PTY information
is detected. If no buttons are pressed within
several seconds, previously selected PTY is
searched. During 1 loop, if desired PTY is not
found, the unit will return to previous mode.
Press PROG/PTY button on the RC for the 3rd
time to switch the PTY function off.

REG (Regional) function

Press repeatedly MENU button on the panel

or RC to select RDS. Press OK button on the
panel or ENTER button on the RC to enter RDS
setting mode. Press MENU button repeatedly to
choose REG ON (REG OFF); rotate VOLUME
knob or press VOL+/VOL- buttons on the RC to
toggle between REG ON (the receiver accepts
regional variants of the tuned station with REG
icon turned on), and REG OFF (the receiver
ignores regional variants).

Mono/Stereo control (in FM radio

mode)

Press repeatedly MENU button on the panel

or RC to select EXPERT. Press OK button on

Advertising