Maintenance – Инструкция по эксплуатации Elenberg PRT-9050
Страница 35
Maintenance
35
Appliance maintenance
Протрите устройство мягкой, сухой тряпочкой.
Если устройство очень грязное, используйте
для очистки прохладную воду (ниже 40°C).
Wipe with a
soft and dry
cloth.
Use lukewarm water
(below 40) to clean
if the appliance is very dirty.
Never use volatile substance such as
gasoline or polishing powder to clean
the appliance.
Air filter maintenance
It is necessary to clean the air filter after using
it for about 100 hours.
Clean it as follows:
Stop the appliance and
remove the air filter.
Stop the appliance first, then
push up the air filter.
Clean and reinstall the air filter.
If the dirt is conspicuous, wash it with a solu
tion of detergent in luke
warm water. After clean
ing, dry it in a shaded and
cool place, the reinstall it.
Clean the air filter every two weeks if
the air conditioner operates in an
extremely dusty environment.
Turn off the appliance first
before disconnecting from
power supply.
Use a dry and soft
cloth to clean it.
Dangerous!
Electric shock!
Maintenance after using
1. If the appliance will not be used for a long time, be sure to Pull out the rubber plug of the drain
port underside, in order to drain the water.
2. Keep the appliance running with fan only for a half day during a sunnyday to dry the appliance
inside and prevent from going moldy.
3. Stop the appliance and pull out the power supply plug, then take out the batteries of remote
controller and store appliance properly.
4. Clean the air filter and reinstall it.
5. Remove the air hoses and store them properly, and cover the hole tightly
Cut off the power supply
Never sprinkle water onto the main
unit