Answering times setting, Alarm clock function, Other settings – Инструкция по эксплуатации Elenberg TL-1047
Страница 21
21
cally during 8th times ringing.
8. Press #*8# keys to set the phone to receive Caller ID number automati-
cally during 9th times ringing.
Refuse to receive incoming caller ID number setting
Press #*9# keys to set the phone not to receive incoming CALLER ID
NUMBER.
Answering times setting
1. Press #*0* to set the phone to receive incoming Caller ID number in off-
hook state with 0 time answering.
2. Press #*1* to set the phone to receive incoming Caller ID number in off-
hook state with 1 time answering.
3. Press #*2* to set the phone to receive incoming Caller ID number in off-
hook state with 2 times answering.
4. Press #*3* to set the phone to receive incoming Caller ID number in off-
hook state with 3 times answering.
5. Press #*4* to set the phone to receive incoming Caller ID number in off-
hook state with 4 times answering.
NOTE:
The default is with 3 times answering.
Alarm clock function
If you set alarm clock and set it to ON state, when reach the alarm time
you set, the unit will alarm for 55 seconds in off hook. Press any key
(including H.F key) will cancel the alarm ringing and return to on-hook
state.
If it is alarm ringing state, pick up handset will go to off-hook state.
If reaching the alarm time you set, the unit is under alarm clock setting
state, or in off-hook state, or a new ringing is coming, then this alarm
ringing will be shielded automatically.
Other settings
• PULSE M/B RATIO SETTING:
1. Press ##, change PULSE M/B RATIO from 66/33 to 60/40
2. Press ## again, change PULSE M/B RATIO from 60/40 to 66/33
• PULSE PPS SETTING:
1. Press *#01#, change pulse PPS from 10pps to 20pps
2. Press *#01# again, change pulse PPS from 20pps to 10pps
• REVIEW SOFTWARE VERSION
Press *#06# to review the software version.