16 setting flash time, Setting pause time, Receiving a call – Инструкция по эксплуатации Elenberg TL-1047
Страница 16: Making call, Function and operation description
16
Setting flash time
1. After finished Alarm clock setting. LCD displays SET 5 FLASH
2. Press SET/STORE key you will see “FLASH 4 110” on LCD to indicate that
the current flash time is 110 ms.
3. Press △ or ▽ key to change and you have following choice: 90ms/
110ms/180ms/300ms/600ms/1000ms.
4. Press SET/STORE key to confirm and go to next item set.
Setting pause time
1. After finished flash time setting. LCD displays SET 6 PAUSE
2. Press SET/STORE key you will see “PAUSE 1 3600” on LCD means pause
time is 3.6s.
3. Press △ or ▽ key to change and you have following choice: “PAUSE 2
5000” (pause time is 5s), “PAUSE 3 7000” (pause time is 7 s), “PAUSE 4
9000” (pause time is 9 s)
4. Press SET/STORE key to confirm or DEL to quit.
Receiving a call
• RECEIVE A CALL FROM HANDSET
1. When incoming a call, pick up the handset and talk to the other end
2. After finished, return the handset to the base.
• SWITCH HANDSET TO SPEAKERPHONE
1. When talking by handset, press H.F key and return the handset to the
base;
2. After finished the Speak phone conversation, press H.F key again.
• RECEIVE A CALL FROM SPEAKERPHONE
1. When the unit rings, press H.F key and talk to the caller,
2. After finished, press H.F key again.
Making call
• HANDS-FREE STATE SWITCH TO HANDSET STATE
1. Press H.F key into hands-free mode
2. Pick up the handset switch to handset state
• MAKE A CALL ON HANDSET MODE
1. Pick up the handset;
2. When hearing the dialing tone, dial the desired number. LCD times
the conversation after 6 seconds automatically;
3. After finished, return the handset to the base.
• MAKE A CALL ON HANDSFREE MODE
1. Press H.F key
2. When hearing the dialing tone, dial the desired number. LCD times
the conversation after 6 seconds automatically
3. After finished, press H.F key again.
Note: In order to with a clear hands free speaking, you should talk from
the base about 32CM.
FUNCTION AND OPERATION DESCRIPTION