Elenberg TL-1047 - Инструкция (Страница 17)

17
Redial function
1. When dialing out a number but the line is busy. Return the handset to
the base.
2. Pick up the handset
3. Press REDIAL key, the last number is dialed out again.
Pre-dialing
1. In on-hook state
2. Dial the desired number, if any mistake, use DEL key to edit.
3. Press REDIAL key, the number on display is auto-dialed out.
Pause function
If dial a number from PABX extension, press PABX number (normally “0”
or ”9”) + PAUSE+ desired number. When line is busy, just press REDIAL
key to redial.
Reviewing, Calling back and Deleting incoming numbers
When receiving a phone call, LCD will display the phone number togeth-
er with the information of date, time, and a serial number. The current
date and time will be updated by the FSK caller id signal, while the year
setting remains unchanged.
• REVIEWING INCOMING CALLS
1. Press IN key enter incoming call reviewing state. LCD displays “IN”
sign
2. Press △ or ▽ key to view the incoming call memories including calling
number, date, and time.
3. To scroll rapidly, press and hold IN key for 3 seconds.
• DELETING INGCOMING CALLS
1. When review the desired number, press DEL key, the number is de-
leted except VIP number.
2. Press and hold DEL key for 4 seconds, all the incoming messages are
deleted.
• CALLING BACK INCOMING NUMBER
1. When review the desired number. For a local call, press the REDIAL
key the number is dialed out.
2. When review the desired number. For a long distance call, press RE-
DIAL key twice to add long distance code 8 at beginning to dial out
the number (the telephone should be unlocked.)