Elenberg DW-9205 - Инструкция (Страница 32)

32
Starting a wash cycle.
1. Draw out the lower and upper basket, load the dishes and push
them back. It is commended that loading the lower basket first,
then the upper one. The expensive and finer chinaware should not
be put in.
2. With a little force to ensure the door is properly closed.
N0TE: a sound of click could be heard when the door is closed per-
fectly.
3. Insert the plug into the socket.
The power supply is 230V 50HZ, the specification of the socket is
250V10A.
4. According to the soil level to choose the desired program by press-
ing program selection button.
5. Press the ON/OFF button
6. Press this button to start automatic washing.
7. Press the ON/OFF button at the end of washing. Open the door of
dishwasher after waiting 30 minutes.
Canceling or modifying a wash cycle setting.
Premise: A cycle that is underway can only be modified if it has only
been running for a short time. Otherwise, the detergent may have
already been released, and the appliance may have already drained
the wash water. If this is the case, the detergent dispenser must be
refilled (seethe paragraph entitled” Loading the Detergent”).
Change the programm
Press the button (9) to stop washing.
Press the program button to select the
program.
Press the button (9) to start washing.
At the End of the Wash Cycle.
At end of washing, the time display will flash for 8 seconds while
the buzzer sound. But at the end of delayed washing, no sound of
the buzzer, only the flash of the time display.
Forget to Add a Dish?
A forgotten dish can be added anytime before the detergent cup
opens.
1 Pull the door handle.
2 Do not open the door until the water spray action stops. Steam
may rise out of the dishwasher.
3 Add forgotten dishes.
TURNING ON THE APPLIANCE