Philips FC9150 - Инструкция (Страница 7)

- Children should be supervised to ensure that they do not play with the appliance.
- The plug must be removed from the socket-outlet before you clean or maintain the appliance.
- Do not point the hose, the tube or any other accessory at the eyes or ears nor put it in your
mouth when it is connected to the vacuum cleaner and the vacuum cleaner is switched on.
Caution
- When you use the vacuum cleaner to vacuum ashes, fine sand, lime, cement dust and similar
substances, the pores of the dustbag become clogged. As a result, the dustbag-full indicator will
indicate that the dustbag is full. Replace the dustbag, even if it is not full yet (see chapter
‘Replacing the dustbag’).
- Never use the appliance without the motor protection filter. This could damage the motor and
shorten the life of the appliance.
- Only use Philips s-bag ® synthetic dustbags.
- During vacuum cleaning, especially in rooms with low air humidity, your vacuum cleaner builds
up static electricity. As a result you can experience electric shocks when you touch the tube or
other steel parts of your vacuum cleaner. These shocks are not harmful to you and do not
damage the appliance. To reduce this inconvenience we advise you:
1 to discharge the appliance by frequently holding the tube against other metal objects in the
room (for example legs of a table or chair, radiator etc.); (Fig. 2)
2 to raise the air humidity level in the room by placing water in the room. For example, you can
hang containers filled with water from your radiators or place bowls filled with water on or
near your radiators (Fig. 3).
- Noise level: Lc = 75 dB (A).
Electromagnetic fields (EMF)
This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled
properly and according to the instructions in this user manual, the appliance is safe to use based on
scientific evidence available today.
Preparing for use
hose
1 To connect the hose, push it firmly into the appliance (‘click’) (Fig. 4).
2 To disconnect the hose, push the buttons and pull the hose out of the appliance (Fig. 5).
Telescopic tube
1 To connect the tube to the handgrip, insert the handgrip into the tube. Fit the spring-loaded
lock button into the opening in the tube (Fig. 6).
- To disconnect the tube from the handgrip, press the spring-loaded lock button and pull the
handgrip out of the tube.
2 Adjust the tube to the length you find most comfortable during vacuuming (Fig. 7).
TriActive nozzle and accessories
1 To connect the TriActive nozzle or an accessory to the tube, press the spring-loaded lock
button on the tube (1) and insert the tube into the nozzle or accessory (2). Fit the spring-
loaded lock button into the opening in the nozzle or accessory. (Fig. 8)
Note: You can also connect the accessories directly to the handgrip of the hose in the same way.
2 To disconnect the nozzle or an accessory from the tube, press the spring-loaded lock button
and pull the nozzle or accessory off the tube.
English 7