Saturn ST-EC0141 - Инструкция (Страница 3)

4
repairs on the electrical parts of the
appliance. By failing to observe this
rule, you risk your safety and the war-
ranty may become invalid. Only quali-
fied technicians can repair the appli-
ance.
-
Do not operate this appliance, if it
is not working properly, if any liquid
enters in contact with the motor unit
or if you drop the appliance. If it is
detected any damage or malfunction,
you must contact the store, where you
bought the appliance or a qualified
technician in order to repair the appli-
ance or replacement. Assure that only
original parts or components are used.
Never attempt to repair the appliance
by yourself.
-
To avoid the accidents or electrical
shocks, make sure that no fluids enter
in contact with any electrical parts or
with the supply cord. Do not expose
the appliance to humidity, do not use
it outdoors and keep it away from any
objects filled with fluids, such as
washbasins, vases, flowerpots, etc. If
any fluid accidentally spills on the mo-
tor unit, remove the plug from the
power socket and go to the store,
where the appliance was bought or get
it repaired by a qualified technician.
-
The temperature of accessible
surfaces may be high, when the appli-
ance is operating. Avoid the contact
with these surfaces to prevent the risk
of burns.
-
Do not move the appliance during
operation or until the oil or other liquid
fat has cooled down completely, in
order to avoid burns. Always wait until
it has cooled down completely.
-
After using the appliance and be-
fore proceeding to any cleaning opera-
tion or storage, make sure the appli-
ance has cooled down completely and
it is disconnected from the wall socket.
-
Never immerse the detachable
control panel or the electrical resis-
tance in water or any other liquid, and
regularly check for damages on the
electrical resistance (bends or dents).
-
This appliance is provided with a
safety device that doesn’t allow the
operation, if the control panel and
electrical resistance are not correctly
placed.
-
Hot steam is released through the
permanent filter on the lid during fry-
ing. Keep your face and hand at a safe
distance from steam, especially when
you remove the lid.
-
Place the appliance on a stable
and flat surface, protected from im-
pacts and away from flammable mate-
rials. Also keep it away from gas or
electrical burners, hot ovens, walls,
furniture or appliances sensible to
heat and steam. Make sure you place
it on a well ventilated area near ex-
hausts and similar appliances.
-
The wall socket must be accessi-
ble so that the plug can be easily un-
plugged in an emergency.
-
Periodically check the supply cord
for any damages. If the supply cord is
damaged, contact the store, where the
appliance was bought or a qualified
technician for repairing or replacement
in order to avoid a hazard.
-
Do not place any objects over the
supply cord, never crease or crimp it,
and make sure to keep it away from
cutting edges, hot surfaces and away
from places, where a person can trip
over it, in order to avoid drops. Never
leave the supply cord hanging, where
children could grab it.
-
Never use the appliance without
oil or liquid fat, indicated for frying at
high temperatures, and do not use it
with any other liquid besides the ones
previously informed. The use of the
solid fat is not advised, since it may
contain water that in contact with fat
at high temperatures, may cause
splatters or spills.
-
Make sure the appliance is filled
with oil or liquid fat between the “MIN”
(minimum) and “MAX” (maximum)
levels, indicated inside the removable
inner pot, to prevent either spilling or
overheating.
-
Avoid water and ice from coming
in contact with hot oil or fat, as this
may cause heavy bubbling and in con-
sequence, splatters and spills. Remove
the excessive ice (frozen food) or wa-
ter before frying.
-
Do not overfill the frying basket
with food.
-
After cleaning, dry all parts thor-
oughly before filling the removable
inner pot with oil or liquid fat. Never
switch on the appliance empty, since it
can be damaged.
-
Always hold the plug to discon-
nect it from the wall socket and not by
the power cord.
-
Avoid using any adaptors or ex-
tension leads. If necessary, use only
approved ones.
-
This appliance is provided with a
safety thermal device that automati-
cally switches off, in case of overheat-
ing. If this device is activated, switch
off the appliance from the wall socket
and press the button “Restart” on the
control panel’s back side. The “Re-
start” button is only accessible with a
small and sharp object.
-
If you do not plan to use the ap-
pliance for a considerable period of
5
time, disconnect it from the wall
socket.
-
This is a Class I appliance with an
earthed supply cord and plug that
must always be connected to an
earthed wall socket. If the wall socket
does not have earth connection, is the
customer’s responsibility to replace it
by another with earth connection.
-
This appliance is not intended to
be operated by means of an external
timer or separate remote-control sys-
tem.
PREPARING FOR USE
Frying with this Deep Fat Fryer is
much more easily and without splat-
ters. Totally dismountable allow an
easy cleaning.
Before using
-
Make sure that all the packaging
materials have been properly removed
before use.
-
Clean all the appliance’s accesso-
ries (D, E and G) by hand, except the
detachable control panel (A) and the
electrical resistance (H), and dry with
a dry cloth - see “Cleaning”.
Note: you may wash the inner pot (G)
and the frying basket (E) in the dish-
washer machine. Please, remove the
detachable handle (F) from the frying
basket to avoid damaging it.
Operation
-
Place the appliance on a stable,
flat surface and heat resistant, pro-
tected from impacts and away from
inflammable materials.
-
Remove the supply cord from the
compartment in the rear of the control
panel (A).
-
Insert the inner pot (G) into the
casing (J) and then fit the control
panel (A) to the assembly, using the
grooves on the rear of the outer cas-
ing (J). Check that the control panel
(A) is correctly fitted.
-
Fix the handle (F) to the basket
(E), inserting the two ends of the han-
dle (F) into the inner fixing points of
the basket (E) and pressing the handle
(F) until it fits into the upper edge of
the basket (E). Check that the handle
(F) is properly fixed.
-
Pour the oil or liquid fat into the
inner pot (G), carefully observing the
“MIN” (minimum) and “MAX” (maxi-
mum) marks on the inside of inner
pot.
-
Connect the appliance to the wall
socket. A red light on the control panel
(A) will come on indicating that the
appliance is working. This light will
remain on during operation.
- Select the desired temperature
using button (B). For further informa-
tion on temperature selection, please
consult the packaging of the foodstuff
in question or the “Temperature Table”
in this manual. The green light on the
control panel (A) stays on until the
required temperature is reached.
-
When the green light on the con-
trol panel (A) goes out, place the pre-
viously drained and/or dry foodstuffs
in the basket (E).
-
Carefully place the basket in the
inner pot (G) so as to avoid the violent
bubbling of the oil or fat and prevent
burns.
-
For foodstuffs to be golden and
evenly fried, turn them occasionally
during the frying process or shake the
basket (E) carefully.
-
The appliance maintains the tem-
perature selected throughout the fry-
ing process by continually switching
the thermostat on and off, indicated
by the green light on the control panel
(A).
-
When the foodstuffs are fried to
your taste and you do not wish to use
the appliance further, turn button (B)
to the “OFF” position and disconnect
the appliance of the wall socket.
-
Lift the basket (E) using the han-
dle (F) and drain any excess oil or fat
from the foodstuffs by shaking the
basket (H) over the inner pot (G) or
by positioning the basket (E) over the
inner pot (G) in the drain position.
Note: do not move the appliance
when it is in use. Wait until the oil or
liquid fat has cooled completely.
Oil Replacement
-
The oil must be frequently
changed, normally after 10 uses and
whenever it presents dark color or
different smell.
-
Place the temperature selector
knob (B) on the “OFF” position and
disconnect the appliance from the wall
socket.
-
Make sure that the appliance and
the oil have cool down completely
before proceeding with this operation.
-
Remove the old oil and fill the
inner pot with new oil (G) between the
“MIN” (minimum) and “MAX” (maxi-
mum) levels.
Note: do not mix used oil with new
oil. Replace all the oil at the same
time. For recycling the oil always fol-
low the local authority rules.