KORTING OKB481CRC - Инструкция (Страница 29)

Setting the Cooking
Programme
Operation Period
This programme enables to e.g. automati­
cally turn on the oven for a preset period via the
relay of the timer.
NOTICE: An operation period can only be set
if the oven selector switch is not in zero position!
Please also observe that all inputs are cancelled
if you move the oven selector switch to zero po­
sition during an active cooking programme!
The setting range of the operation period is
from 0:00 to 23:59. Proceed as follows:
Press the mode button until the I—indicator
for operation period flashes. On the display, the
time “0:00” is displayed instead of the time of
day.
Note: If you do not make an input in the next
5 seconds, the timer returns to the time of day
display.
Use the minus and plus button to set the de­
sired period in steps of 1 minute. The I—=H indica­
tor for operation period is illuminated.
You can also confirm the input with the mode
button.
After the set time has elapsed, a signal
sounds (......... ) (i.e. a pause follows after four
signals). The oven swiches off. On the display,
th^HH indicator for operation period flashes and
the time “0:00” is displayed. The signal ends au­
tomatically after approx. 1 minute while the I—>1
indicator continues to flash. Press any button to
exit the current mode or to stop the signal indi­
cating the end of time.
Operation End
(Type Operation Period/Operation End)
In case of a previously set operation period
(see Setting the Cooking Programme > Opera­
tion Period), this programme enables you to
shift the operation end forward with regard to
time, i.e. to delay it.
NOTICE: An operation end can only be set
if a timer of the type (Operation Period and
Operation End) is used and if the oven selec­
tor switch is not in zero position. If the cooking
programme is active, please also observe that
all inputs are cancelled if you move the oven
selector switch to zero position!
Press the mode button until the I—indicator
for operation end flashes. The current time of
day is displayed on the display.
Note: If you do not make an input in the next
5 seconds, the timer returns to the currently ac­
tive operation period programme.
Starting from the current time of day, use the
plus button to set the desired end in steps of 1
minute.
Th^-jH indicator for operation end remains
illuminated until the baking process starts. This
occurs at the time “operation end minus opera­
tion period”. At this moment, the timer changes
to operation period mode. The I—SH indicator for
operation end is extinguished, the 1—^ indicator
for operation period is illuminated and the re­
maining operation period is displayed instead.
The running programme can also be called
with the mode button while it is active. This
enables to check and possibly correct the set
data using the set buttons. To avoid errors, it is
not possible to reset the time of day while a pro­
gramme is active.
After the set time has elapsed, a signal
sounds (......... ) (i.e. a pause follows after four
signals). The oven swiches of. On the display,
th^ h-5»l indicator for operation period flashes
and the time “0:00” is displayed. The signal
ends automatically after approx. 1 minute while
th^-jH indicator continues to flash. Press any
button to exit the current mode.
You can also manually stop the signal indi­
cating of the end of the time by pressing any
button or move the oven selector switch to the
zero position.
Setting The Key Lock
If you activate the key lock, the timer can
no longer be operated with regard to time and
programme. Neither the time of day nor an
elapsing minute minder nor an active cooking
programme can be modified. However, the set
functions will operate accurately.
UK
29