KORTING OKB481CRC - Инструкция (Страница 28)

Cooking time and cooking
end time 1^
Press the mode button [©] until L1 flashes.
Set the desired cooking time as described at
“COOKING TIME”. Press the mode button un­
til L2 flashes then set the desired cooking end
time as described in the paragraph “COOKING
END TIME”. The oven will begin cooking based
on the calculation of cooking end time minus
cooking time. For example, if cooking end time
is set at 12.00 and a cooking time of 1.30h is
set, the oven will begin cooking at 10.30 and will
switch off at 12.00.
Cancelling programmes
Programmes can be cancelled at any time by
re-selecting the previously selected functions
and resetting the time to zero using button
The time of day cannot be set while an auto­
matic programme is in progress.
PROGRAMMER CLOCK 3 BUTTONS (Fig. 7)
© Indicates the input of the time of day
■ o Indicates an activated key lock
0 Indicates an activated safety cut off
o
Indicates an activated minute minder
Indicates an activated programme in
operation period mode
Indicates an activated programme in
operation end mode
Fig. 7
1 . J O
S B @
pi P2 P3
Front view:
(P1) Minus button
(P2) Mode button
(P3) Plus button
Setting the Time of Day
NOTICE: The time of Day can only be set if
the oven selector switch is in zero position! Af­
ter you have applied voltage to the oven, 12:00
appears on the display and the O indicator for
time of day flashes. To use the minus and plus
buttons to set the time of day in steps of min­
utes. The time of day now displayed elapses
accurately to the second. The timer is now
operational and in “manual” mode. NOTICE:
If you want to set the time of day during later
operation, press the mode button until the O in­
dicator for time of day flashes and subsequently
proceed as described above.
Setting the Minute Minder
The setting range of the minute minder is
from 0:00 to 23:59.
Press the mode button until the O indicator
for the minute minder flashes.
Note: If you do not make an input in the next
5 seconds, the timer returns to the time of day
display. To use the minus and plus buttons to
set the desired period in steps of 1 minute af­
ter confirming with the mode button, the time of
day reappears on the display.
Th^O indicator for minute minder is illumi­
nated on the display.
After the set time has elapsed, a signal
sounds (.. ..) (i.e. a pause follows after two sig­
nals). On the display, the O indicator flashes.
The signal ends automatically after approx. 1
minute while the O indicator continues to flash.
Press any button to exit the current mode.
You can also manually stop the signal indicat­
ing the end of time by pressing any button.
28