KORTING OKB481CRC - Инструкция (Страница 27)

Instructions for use of control devices (depending on model)
TOUCH-CONTROL PROGRAMMER CLOCK (Fig. 6)
A Minute minder
Q Increase time
rn Clock 1^ Cooking time
(©] Mode selector O End of cooking
0 Reduce time LI -L2-L3-L4 led indicators
Fig. 6
Setting the time of day □
When the oven is first connected to the pow­
er supply, the display shows 12.00 and the led
indicator(L4) flashes. Press the touch control
buttons 0 and 0 to set the time of day: after
five seconds the time is stored and L4 switches
off. To change the time at a later stage, press
the mode selector button (®1 until L4 flashes.
Minute minder A
Press the mode button (©) until L3 flashes,
then set the desired cooking time using the
0 and 0 buttons. The setting range is from
0.01 to 2.30 h. The display will show the set
time and L3 will remain lit. At the end of the
set time, an acoustic signal sounds (two
signals every two seconds) and L3 flashes.
Press any button to stop the acoustic signal
and switch off L3.
Cooking time
Press the mode button!! di] until L1 flashes.
Set the desired cooking time using the 0 and
0 buttons (the setting range is from 0.01 to
10.00h): after five seconds the cooking time is
stored and L1 remains lit. After the set time has
elapsed the oven switches off automatically, an
acoustic signal sounds (four signals every two
seconds) and L1 flashes. Press any button to
stop the acoustic signal and switch off L1.
Cooking end time 1^
Press the mode butto^li] until L2 flashes.
Set the desired cooking end time (max. 23.59)
using buttons 0 and 0 after five seconds the
time is stored and L2 remains lit. At the set time
the oven switches off automatically, an acoustic
signal sounds (four signals every two seconds)
and L2 flashes. Press any button to stop the
acoustic signal and switch off L2.
UK
27