Beko CS 52010 - Инструкция (Страница 48)

Semi-automatic programming
This mode allows a manual start time but an automatic switch off time, which is very useful
to prevent the over cooking of food.
Press "S" button. Press the "+" (orbuttons, to set the cooking time duration (Auto
and S will be displayed) in minutes.
Set the oven thermostat knob to the required temperature and function selection knob
to the desired position.
The oven will switch on and cooking will commence.
The programmer will switch the oven off at the end of the preset cooking time. "Auto"
will flash and the timer alarm will bleep. To turn off the alarm press the "S" button.
Set the oven thermostat knob to the "•" (off) mark.
»■ Press "v!l>" button to cancel "Auto".
Automatic programming
The programmer will switch the oven on and off at the required times.
Ensure the oven thermostat is in "•" (off) position, and the correct time has been set.
Press the button to cancel any program stored. (Auto and "S" symbol will not
be displayed)
Press the
"S"
button and press "+" (or"-") buttons, to set the stop time required.
(S and auto will be displayed)
Press the "S” button and press "-" button to set the cooking time (duration) required.
Set the oven knob to the required cooking temperature and place your food in the oven.
The oven will switch on at the required time, cook the food and switch off at the
predetermined time.
At the end of cooking the alarm will bleep and "Auto" will flash. To turn off the alarm
press the " S " button.
Press "vliV" button to cancel "Auto".
Set the oven thermostat and function selection knob to the "•" (off) mark.
oooooo
TIMER t/ll/t ^ III,
H tzr o ^ v:l> - +
Some models, there is
only one knob to adjust
the stage of cooking.
Make your adjustments
by using this knob.
14