Hyundai H-CSX10A - Инструкция (Страница 2)

2
Features
• Molded rock case
• Woofer press paper 10”
• P.W.M Mosfet power supply
• Thermal/ Short/ Overload protection circuit
• Power & Distress indicator
• Remote control
• Low/ high level input
Accessories
Before using please check all accessories are included.
• Remote control (RC)
• RC wire
• High level input connector with wire
• Mounting magic tape
• Plastic mounting caps and screws
• Instruction manual
Subwoofer and remote control mounting
Caution: Pre-wire and test the unit for proper functions before mounting the unit permanently.
Subwoofer mounting: Find a suitable location in the vehicle in which to mount the amplifier. Since the subwoofer is a large, heavy enclosure, it is
highly recommended that you mount it in the trunk compartment of your vehicle.
Mark the location for the mounting hole screws by positioning the cabinet where you wish to install it. Use heavy duty bolts to secure it. After you
tightened it down, try to shake it or move it. Then tighten the screws again.
Remote control mounting: Select a mounting location that allows easy access to the control while driving.
Using the subwoofer level remote control as a template, mark and drill holes in the mounting surface (pic. 1).
Notes:
• Verify that mounting location is safe for drilling and wiring, and it will not interfere with the mechanical
and electrical components of the vehicle.
• Mount the unit using the brackets to the vehicle body so it does not move with sudden braking.
• Do not expose to excessive heat and humidity.
• Do not allow liquid and small objects get inside the unit.
Pic.1