Panasonic SC-AK410 - Инструкция (Страница 15)

C D s
CD selection
Choose CDs with this mark:
DIGITAL AUDIO
Do not:
use irregularly shaped CDs.
attach extra labels and
stickers.
use CDs with labels and
stickers that are coming off
or with adhesive exuding from
under labels and stickers,
attach scratch proof covers or
any other kind of accessory,
write anything on the CD.
clean CDs with liquids. (Wipe
with a soft, dry cloth.)
use CDs printed with label printers available on the market
To prevent damage
Always observe the following points:
• Load only 1 CD on the tray.
• Load CDs as shown in the figure.
An adaptor is not needed with 8cm CDs (singles).
8 cm CD
1 - 2
12 cm CD
• Set the system on a flat, level surface.
• Always unload all CDs before moving the unit.
Do not:
• set the unit on top of magazines, inclined surfaces, etc.
• move the unit while a tray is opening/closing, or when loaded.
• put anything except a CD in the tray.
• use cleaning CDs or CDs which are badly warped or cracked.
• disconnect the AC power supply cord from the household AC outlet
during disc changing operation.
This unit can play MP3 and CD-DA (digital audio) format audio
CD-R and CD-RW that have been finalized (a process that enables
CD-R/CD-RW players to play audio CD-R and CD-RW) upon
completion of recording.
It may not be able to play some CD-R or CD-RW due to the
condition of the recording.
m/REW/v,
►W/FF/A
w
►/II, CD
For Russia, Ukraine,
Australia and New
Zealand:
CD DISP---------------- ^
For others:
CD/RDS DISP
- ■,STOP
1 Press [^, OPEN/CLOSE] to open the tray.
The unit comes on.
2 Set a CD in the tray. (Label must face upward.)
To continue loading CDs in the other trays
Press [1]-[5] to select the required tray and press [±,OPEN/
CLOSE] to open the tray.
Press [^, OPEN/CLOSE] to close the tray.
3 Press [1]-[5] to play your desired disc.
Current disc indicator
(Alternatively, you can press [►/!!, CD] if the current disc is your
desired CD.)
The track number and its elapsed playing time are shown.
Use the CD Play Mode function's ALL-DISC mode to play CDs in
succession. (•♦ page 9)
To stop the disc play
Press [■, STOP].
The total number of tracks and total playing time are shown.
“1^” indication
It indicates current disc has 16 or more tracks.
One touch play
During standby mode and when a CD is loaded, press [►/II, CD] or
[1] - [5].
The unit comes on and play starts.
To pause Press [►/!!, CD] during play.
Press again to resume play.
To search forward/
backward
Hold down [^<◄/REW/V] (backward)
or [►►l/FF/A] (forward) during play or pause.
To skip forward/
backward Press [K^/REW/V] (backward) or
[►►l/FF/A] (forward) during play or pause.
• During 1-RANDOM or A-RANDOM play (^ page 9), you cannot
skip to tracks already played.
• During program play (-► page 9), 1-RANDOM or A-RANDOM play,
you can search only within the track.
• Always stop the changer before loading or changing CDs. You
cannot change CDs while a disc is playing.
CD display
You can display the remaining play time of the current track.
Remote control only
For Russia, Ukraine, Austraiia and New Zealand
Press [CD DISP] during play or pause.
For Others
Press [CD/RDS DISP] during play or pause.
Every time you press the button:
Elapsed play time ^ Remaining play time
When track number 25 or greater is playing, remaining play time
display shows “—:—”.