Kastor KC Modular Pipe - Инструкция (Страница 36)

EN
GL
ISH
Temperatures in some rooms and heating devices can rise
quite high. For instance, the temperature above a sauna stove
may be +250°C/482°F.
The surface temperature of a steel fireplace at the connec-
tion point to the flue channel may rise up to +400°C/752°F
and the connection pipes of heating devices may heat up to
+300°C/572°F.
If a surface treatment is desired for these situations, you must
use heat-resisting paint (minimum of +500°C/932°F).
In dry indoor surroundings, the Kastor Chimney can be clad
with another metal mantle (stainless steel, copper, brass etc.)
for visual effect, but this must not interfere with inspection
and maintenance. Where necessary, sufficient cooling must
be ensured by arranging air circulation between the two
mantles.
1.5. BASIC INSTALLATION SETS AND THEIR PARTS
INSTALLATION FROM ON TOP OF THE FIREPLACE
Rain cap
End cap
Straight pipe element
Roof seal
Straight pipe element
flat ceiling plate
Straight pipe element
flat ceiling plate
Damper part
Starting element
INTERNAL INSTALLATION FROM BACK
Rain cap
End cap
Straight pipe element
Roof seal
Straight pipe element
Straight pipe element
flat ceiling plate
Pipe Tee 90°
Pipe element with clean-out opening
Starting element
Base element, adjustable height
(60–520 mm)
flat ceiling plate
Straight pipe element
Illustration 1. Basic installation sets and their parts
1.5.