Instruction for use, Appliance installation – Инструкция по эксплуатации Beko CDA 38200

Страница 9

Advertising
background image






























GB

Instruction for use

Don’t stand or sit on the appliance, don’t

lean on the doors, wire shelves or shelves.

Do not use your appliance near heaters,

cookers or other sources of heat and fire.

In order to avoid any possibility of damage

or accident, do not place unstable objects
containing liquids or sources of fire on the top
of the appliance (such as flower vases, flower
pots, candles, lamps, etc.).

Do not leave food in the appliance if it does

not work.

If you do not use your appliance for a few

days, we do not recommend you to unplug it.
If you do not use it for a longer period of time,
please proceed as follows:
- take out the plug from the mains;
- empty the refrigerator and the freezer
- defrost and clean it
- leave the doors open to avoid unpleasant
smells

The supply cord can only be replaced by an

authorised person.

Appliance installation

This appliance must be used only for its
intended purpose, (household use), in
suitable areas, far from rain, moisture or
other atmospheric influences.

The correct installation is essential to provide
the operation of the appliance at its best.

For this reason we recommend you to place
the appliance in rooms far from rain, moisture
or other atmospheric conditions. The
appliance must be placed far from any source
of heat and fire.
The installation in a hot room, exposure to the
direct sunlight or placing of the appliance near
a heat source (heaters, cookers, ovens),
increase the energy consumption and reduce
its life. Therefore, this appliance must be
installed only in rooms with doors and
windows which allow a good circulation of the
air.

When placing the appliance into your house,
please observe the following minimum
dimensions:
- 100 cm from cookers operated with coal or
petrol;
- 150 cm from electrical cookers and / or gas
cookers.

Please provide the free circulation of the air
around the appliance, by observing the
clearances specified (Item 2).

Please fit on the condenser (at the rear) the
supplied spacers (Item 3).

The floor or the support where the appliance

will be placed must be perfectly flat; otherwise
you can adjust the horisontal level by djusting
the front feet of the product (Item 4).

Please keep a distance of min. 25 cm from

any furniture „suspended”above the
appliance. This clearance will also be kept in
case of a niche or of another construction
element.

The appliance is not built to be included into

the furniture.

Please fit the supplied accessories.

Ambient temperature

It is an important factor in the operation of
your appliance from the point of view of
reaching the inside temperatures with a
minimum energy consumption and for the
assessment of its lifetime.

This appliance was designed to operate and
provide the design parameters (specified in
the user instructions and on the rating label) in
a range of ambient temperatures between +10
and +32 degrees C (50 and 90 degrees F).

At ambient temperatures above the highest
limit of 32 degrees C (90 degrees F), the
farther we are from it, the breaks are shorter
and shorter, the appliance tends to work
continuously, the inside temperatures
increase, same as the energy consumption.

3

Advertising