ViTESSE VS-657 - Инструкция (Страница 2)

DEAR CUSTOMER!
IMPORTANT SAFEGUARDS
You have made an excellent decision. Vitesse® “Nouveau” home range offers
you an exclusive, high quality range of appliances for your ultimate home luxury
and healthy living.
When using your flatiron, basic safety precautions should always be followed,
including followings:
Read all instructions before using
1. Use iron only for its intended household use only.
2. To protect against risk of electric shock, do not immerse the iron in water or
any other liquids.
3. The iron should always be turned to OFF before plugging or unplugging from
outlet. Never yank cord to disconnect from outlet; instead, grasp plug and pull
to disconnect.
4. Do not allow power cord to touch hot surface. Let iron completely cool before
putting away.
5. Always disconnect the plug of the iron from electrical outlet when filling with
water or emptying and when not in use.
6. Do not operate iron with a damaged cord or if the iron has been dropped or
damaged. To avoid a hazard such as the risk of electric shock, do not
disassemble the iron, it must be taken to a qualified serviceman or
manufacturer for examination and repair. Incorrect reassembly can cause a
risk of electric shock when the iron is used.
7. Place the iron out of the reach of children, close supervision is necessary for
any appliance being used by or near children .Do not leave the iron
unattended while connected to the supply mains or on an ironing board.
8. Burns can occur from touching hot metal parts, hot water or steam. Use
caution when you turn a steam iron upside down there may be hot water in
reservoir.
9. Never use the iron facing towards the people when performing steam and
turbo steam, which can easily cause burns.
10. Check if the voltage indicated in the rating plate corresponding to the mains
voltage in your home.
11. The iron must be used and heel rested on a stable surface.
12. When placing the iron on its stand, ensure that the surface on which the stand
is placed stable.
13. The iron is not to be used if it has been dropped, and there are visible signs of
damage or it is leaking.
Special instructions
1. To avoid a circuit overload, do not operate another high wattage appliance in
the same circuit.
2. If an extension cord is absolutely necessary, a 10-ampere cord should be
used. Cords rated for a lower amperage may overheat, care should be taken
to ensure that the cord cannot be accidentally pulled or tripped over.
3. During using of this iron, if all indicator light blink or red indicater light blinks,
unplug the unit from the main socket, and then plug into again, it will be OK. If it
still blinks again after re-plugging, please take it to a qualified serviceman or
manufacturer for examination and repair, do not disassemble the iron.
P/1 P/2
www.vitesse.ru
1. Self-cleaning button
2. Soleplate
3. Spray Nozzle
4. Anti-calc Box
5. Adjustable Steam Knob
6. Spray Button
7. Turbo-Steam Button
8. Temperature indicator light lens
9. Temperature control Button
10. Cord Guard
11. Power indicator light
PARTS AND FEATURES
fig.1
Use of Indicator Light
1. The iron use a red indicator light to indicate Power on/off and reset mode, and
green indicator light for temperature setting.(1,2,3,Max)
2. After plugging into main socket, the red indicator light ON, it indicates that the
unit is ready for use. Once press the temperature control button, it will change
to another temperature setting. No response will be provided if press the
temperature control button successively.
3. The unit use one contact switch to control different temperature setting, once
pressing down the temperature control button, temperature can be changed
to another setting.
4. When temperature of soleplate is lower than required,
the indicator light will blink slowly (once per second) if it
is higher than required, indicator light will blink
quickly(once per 0.25seconds),it will stay on when set
at temperature setting range.
Indicator light