English – Инструкция по эксплуатации TIMBERK TGH 4200 O3
Страница 7
8. Maintenance
1. Regularly check the integrity of the gas hose between the gas pressure
reducer and gas valve of the appliance. If any damage of the hose is found,
operation of the appliance is prohibited and the hose should be replaced.
2. Regularly check all gas joints, pipes, and devices for gas leaks (using
soapy water). If any gas leak is found, immediately switch the heater off,
disconnect the gas cylinder, and contact the dealer or manufacturer's
service center.
3. The appliance should be regularly washed to remove dust and dirt from
outer surfaces, since they affect efficiency of its operation and temperature
parameters of room heating. Before commencing preventive maintenance,
switch the appliance off and unplug it from the electric mains (for TGH
4200 O2 model). Let the appliance cool down and then wipe its surface
with slightly wet soft rag.
4. Detergents including those containing abrasives in composition are not
recommended for washing. Exclude damage of the appliance with sharp
objects, since scratches on the painted surface may result in rusting.
5. The rear surface of the gas-fired heater also should be periodically
cleaned to remove dust and dirt. The procedure of preventive cleaning
should be carried out periodically to maintain the technical condition of
the heater and keep its appearance for long years.
ATTENTION!
For your safety, it is prohibited to simultaneously start the gas-fired
ceramic heater and quartz electric heating elements.
9. Disposal
Upon completion of the service life, the heater should be disposed
according to the effective local regulations, rules, and methods. For more
details on disposal of the gas-fired heater, please contact a representative
of the local authority.
5. To switch the quartz electric heating elements off, put both keys to O
position. Unplug the power cord from the socket.
10
www.timberk.com
7
www.timberk.com gas heater
ENGLISH
3.
,
.
,
(
)
.
1.
.
2.
.
3.
,
.
4.
-
.
5.
-
.
6.
.
.
7.
(
TGH 4200 O2).
8.
ODS (
)
,
18%.
9.
,
,
,
.
10.
.
11.
.
12.
60
.
13.
.
1.
TGH 4200 O3
(
)
(1,2,3)
I3B/P
1,4/2,8/4,2
104/207/310
(1,2,3)
29-30
15
1.
TGH 4200 M1 TGH 4200 O2
E .
.
/
2
TGH 4200 SM1
TGH 4200 SM2
(1,2,3)
(1,2,3)
/
-
G30
-
G30
-
G30
-
G30
-
G30
I3B/P
I3B/P
I3B/P
I3B/P
1,4/2,8/4,2
1,4/2,8/4,2
1,4/2,8/4,2
1,4/2,8/4,2
104/207/310
104/207/310
104/207/310
104/207/310
29-30
29-30
29-30
29-30
15
15
5
5
30-60
30-60
30-60
30-60
30-60
2,0/4,0/6,0
220-240/50
0,44/0,88/1,32
730 430 370
730 430 370
575 400 300
575 400 300
www.timberk. om
TIMBERK.
4.
(
. 1)
9.3
11.3
9.5
7.4
7.4
730 430 280
.1
-
-
-
-
-
-
-
-
-
-
-
-
13
12
11
10
9
8
3
1
5
4
2
6
7
-
G30
I3B/P
1,4/2,8/4,2
104/207/310
29-30
15
30-60
9.5
730 430 280
-
-
-
TGH 4200 SM3
(
\
),
,
\
\
.
,
+\- 5-20% (
).
IPX0
IPX0
IPX0
IPX0
IPX0
IPX0
I
-
-
-
-
-