Инструкция по эксплуатации TIMBERK TGH 4200 O3

Страница 4

Advertising

Technical specifications
The technical specifications of heaters are given in Table 1.
Table 1

( )*

Gas cylinder type

(maximum capacity)

Gas consumption by

heating stages (1,2,3)

Parameter

Gas category
Heating power of gas-fired

burner by stages (1,2,3)

Gas pressure

Gas type

Unit

g/h

mbar

Heated room area

Rated current by stages

(1,2,3)

Rated voltage

Rated power by stages

(1,2,3)

Dimensions
Weight

V/Hz

kVt

For more detailed description of technical parameters and specifications please refer to our website
www.timberk.com or ask from the official dealers of TIMBERK.

4. Gas-fired heater description (Fig.1)

6. Preparation for work

1. Carefully remove the heater from the package.

2. Make sure that (for TGH 4200 O2 model) the heating elements and other parts of
the appliance have no remaining crumbles of packing foam plastic or other debris.

3. Carefully install the enclosed gas hose not twisting or breaking it. For that, screw one
end of the hose onto the gas valve connector, while the other end onto the connector
of the enclosed gas pressure controller (reducer). Secure the hose ends on the
connectors with jubilee clips.

4. Install a paronite/rubber spacer inside the cap nut checking its integrity beforehand
and then carefully screw the nut on the outlet of an already prepared gas cylinder
having appropriate capacity (a gas cylinder is not included in the delivery set and
purchased separately). Twisting of the hose is strongly not allowed.

1. Heater body

2. Control panel

3. Double switch of quartz electric heater (TGH 4200 O2 model)

4. Quartz electric heater (TGH 4200 O2 model)

5. Ceramic gas-fired burner

6. Protective face grate

7. Support wheels

8. Gas valve

9. Gas check valve*

10. Gas hose

11. Gas pressure controller (reducer)

12. Gas cylinder clamp

13. Gas cylinder*

14. Fuse burder

* Not included to set delivery

5. Delivery set

1. Heater on wheeled base - 1 pc.
2. Gas pressure controller (reducer) - 1 pc.
3. Gas hose (60 cm) - 1 pc.
4. Jubilee clips - 2 pcs.
5. Operation manual - 1 pc.
6. Warranty certificate - 1 pc.
7. Package - 1 pc.

NOTE:
To improve the product quality, the design and technical specifications of the
heater, as well as its delivery set can be modified by the manufacturer without
preliminary notification.

Fig.1

www.timberk.com

www.timberk.com gas heater

I3B/P

1,4/2,8/4,2

104/207/310

29-30

LPG (propane

and butane) G30

LPG (propane

and butane) G30

LPG (propane

and butane) G30

LPG (propane

and butane) G30

LPG (propane

and butane) G30

I3B/P

1,4/2,8/4,2

104/207/310

29-30

30-60

2,0/4,0/6,0

220-240/50

0,44/0,88/1,32

730 430 370

575 400 300

9.3

11.3

9.5

7.4

730 430 280

Model

TGH 4200 M1 TGH 4200 O2

TGH 4200 O3

TGH 4200 SM1

TGH 4200 SM2

1,4

« »

« »,

2,8

4,2

« », « » « ».

« »,

(

)

(

)

(

TGH 4200 O2).

(440

- Econom)

«I»

(

.3).

(880 - Normal)

«II»

(1320 - Express

Heat)

«I»+«II».

« ».

.6 «

».

LPG (propane

and butane) G30

I3B/P

1,4/2,8/4,2

104/207/310

29-30

30-60

9.5

730 430 280

TGH 4200 SM3

The manufacturer reserves the right to change the set-list of the device (including liquid and powder components) for different

supplies without prior notice. The changes either in no way influence the basic technical parameters of the device or may improve

them, and also not violate the legislation or quality standards of the countries of manufacture, transit and selling.

The changes in the set-list may result in changing of the weight and dimensions of the device, but not more than by +\- 5-20%

(depending on the product category)

NOTE:
Heater can be supplied with the connected gas hose and gear, in this case to
produce the above steps are not necessary.

Electric protection class

IPX0

Water protection class

Advertising