ZELMER 28Z013 - Инструкция (Страница 63)

63 GW28-009_v01
Gently move the iron back and forth until the water tank is empty. –
When Self-Cleaning is complete, release the Self-Cleaning Knob. –
Rest your iron at the stand and allow to fully cool down. –
Wipe the soleplate with a cold damp cloth. –
Caution!
Keep skin/body away from the hot water.
Anti-drip system
The system, which is designed to prevent water
escaping from the sole-plate when the iron is too
cold automatically.
During use, the anti-drip system may emit a loud
clicking sound, par-ticularly during heat-up or whilst
cooling down. This is perfectly normal and indicates
that the system is functioning correctly.
Draining the water
Move the – Steam Control Knob (3) to
position.
Disconnect the iron from mains supply –
outlet.
Remove the iron from the stand as –
described in “How to Use Iron Lock”.
Press the – Burst of Steam Button (4),
to release any trapped water when the
soleplate still hot.
Press the – Spray Buttons (5), to release any trapped water.
Turn the iron upside down and gently shake it to remove the remaining –
water.
When the iron gets cool completely, lock the iron with stand as –
described in “How to Use Iron Lock”, and store in a safe place.
Before storage make sure that Steam Control Knob (7) is in
position.
How to apply the handle for fastening
to the ironing board
The bottom part of the iron stand includes the
handle for fastening it to the ironing board. It is very
useful to secure the iron stand to the table. You shall
fasten it according to the photo.
Cleaning and maintenance
Disconnect the iron from mains supply outlet. –
The iron should get cool completely before cleaning. –
Use a damp cloth and gentle washing liquid for cleaning. –
Do not use aggressive detergents like cream, milk, paste etc. to –
clean the casing. They can remove graphic symbols such as: scales,
marking, caution signs, etc.
Never use sharp or rough objects to remove the deposits on the sole –
plate.
Never use any abrasive, vinegar or descaling agents to clean the iron. –
Ecology – Environment protection
Each user can protect the natural environment. It is neither difficult nor
expensive.
In order to do it: put the cardboard packing into recycling
paper container; put the polyethylene (PE) bags into
container for plastic.
When worn out, dispose the appliance to particular disposal
centre, because of the dangerous elements of this appliance,
which can be hazardous for natural environment.
Do not dispose into the domestic waste disposal!!!
The manufacturer/importer does not accept any liability for any damages resulting
from unintended use or improper handling.
The manufacturer/importer reserves his rights to modify the product any time in
order to adjust it to law regulations, norms, directives, or due to construction, trade,
aesthetic or other reasons, without notifying in advance.