Инструкция по эксплуатации ZELMER 28Z030
Страница 52
52
GW28-025_v01
Preparation for operation – first ironing
Remove any protective films or sticker from the
–
soleplate (1) and the
cabinet, if any.
Unwind and straighten the
–
power cord (12).
Fill the iron as described in “How to fill water”.
–
Connect the iron to a suitable mains supply outlet.
–
Turn the
–
Temperature Dial (2) in clockwise direction to ●●● position
–
control light (10) glows.
Control light goes off when the required temperature is reached.
–
Move the
–
Steam Control Knob (6) to position.
Steam starts coming out from the holes in the sole plate after putting
–
the iron in horizontal position and after
Burst of steam knob (9).
Begin first time ironing with an old towel.
–
The steam is not generated after the water tank is emptied.
–
The preparation work is completed. The iron is now ready for proper
–
use.
After operation
Move the
–
Temperature Dial (2) in anti-clockwise direction to „MIN”;
the iron is switched off.
Move the
–
Steam Control Knob (6) to position.
Disconnect the iron from mains supply outlet.
–
When the iron gets cool completely, store it vertically in a safe place.
–
Spraying
This function can be used any time
–
and is not affect any setting.
Fill the water tank as described in
–
How to Fill Water.
Aim the
–
nozzle (5) to the garment.
Press the
–
Spray Button (8).
It may be necessary to press the
–
spray button a few times to start this function.
Dry ironing
– Always follow the garment manufacturer’s ironing
instructions mentioned at the garment label.
Unwind and straighten the
–
power cord (12).
Move the
–
Steam Control Knob (6) to position.
Connect the iron to a suitable mains supply outlet.
–
Turn the
–
Temperature Dial (2) in clockwise direction to; set ●, ●● or
●●● position.
Control light (10)
–
glows, indicating that the iron is on.
Control light goes off when the required temperature is reached. The
–
iron is now ready for use.
Move the
–
Temperature Dial (2) in anti-clockwise direction to „MIN”;
the iron is switched off.
Disconnect the iron from mains supply outlet.
–
When the iron gets cool completely, store it vertically in a safe place.
–
Steam ironing
– Always follow the garment manufacturer’s
ironing instructions mentioned at the garment label.
Unwind and straighten the
–
power cord (12).
Fill the iron as described in “How to fill water”.
–
Connect the iron to a suitable mains supply
–
outlet.
Turn the
–
Temperature Dial (2) in clockwise
direction to ●●● position. (For optimum steam
quality, do not use ● or ●● setting for steam
ironing).
Control light (10)
–
glows, indicating that the iron is on.
Control light goes off when the required temperature is reached. The
–
iron is now ready for use.
Move the
–
Steam Control Knob (6) to selected position, in order to set
the amount of steam.
After finishing move the
–
Temperature Dial (2) in anti-clockwise direc-
tion to „
MIN”; the iron is switched off.
Move the
–
Steam Control Knob (6) to position.
Disconnect the iron from mains supply outlet.
–
When the iron gets cool completely, store it vertically in a safe place.
–