Hyundai H-CCR8187M - Инструкция (Страница 13)

Operation
13
Local radio station search
Press LIST button twice to show
the function list; rotate VOLUME knob
on the panel or press UP/DOWN
cursor buttons on the RC to select
LOC option. Press SELECT button,
then rotate VOLUME knob on the
panel or press UP/DOWN cursor
buttons on the RC to select LOC ON
or LOC OFF. LOC ON means that
only local stations are received; LOC
OFF means that both local and distant
stations with weak and strong signal
are received.
RDS function
RDS (Radio Data System) service
availability varies with areas. Please
understand if RDS service is not
available in you area, the following
service is not available, either.
AF (Alternative Frequencies)
function
Press LIST button twice to show the
function list; rotate VOLUME knob on
the panel or press UP/DOWN cursor
buttons on the RC to select AF option.
Press SELECT button, then rotate
VOLUME knob on the panel or press
UP/DOWN cursor buttons on the RC
to select AF ON or AF OFF.
When the function is on, AF symbol
will blink on the display.
When the radio signal strength is
poor, enabling the AF function will
allow the unit to automatically search
another station with the same PI
(Program Identification) as the current
station but with a stronger signal,
so that you do not have to retune
the stations when driving between
different transmitter coverage areas.
PS (Program Service name): the
name of station will be display instead
of frequency.
If RDS service is not available in
your area, turn off the AF mode.
TA (Traffic Alarm) function
Press LIST button twice to show the
function list; rotate VOLUME knob on
the panel or press UP/DOWN cursor
buttons on the RC to select TA option.
Press SELECT button, then rotate
VOLUME knob on the panel or press
UP/DOWN cursor buttons on the RC
to select TA ON or TA OFF.
When TA is on, the TA symbol will
show on the display.
In TA mode traffic program will
be automatically searched, until the
program is received. When traffic
announcement is received the unit
will temporarily switch to the tuner
mode (regardless of the current
mode) and begin broadcasting the
announcement. After the traffic
announcement is over, it will return to
the previous mode and volume level.
PTY (Program Type)
Press LIST button twice to show the
function list; rotate VOLUME knob on
the panel or press UP/DOWN cursor
buttons on the RC to select PTY
option. Press SELECT button, then
rotate VOLUME knob on the panel or
press UP/DOWN cursor buttons on
the RC to select the type of program
required. When PTY is selected, the
radio starts to search corresponding
PTY information, and stops if the
corresponding PTY information is
detected. If no buttons are pressed
within several seconds, previously