Vitek VT-3492 - Инструкция (Страница 7)

OPERATING INSTRUCTIONS
SYSTEM ON/OFF SWITCHING
Connect AC power cord of the system to the electrical outlet. Make sure that supply voltage corre-
sponds to the system voltage.
Turn MAIN POWER switch (26) into ON position.
1. To turn the system ON press the POWER button (8) or (30).
Note: LCD (11) will light.
2. With FUNCTION button (4) or (33), select desired operating mode
(TUNER, CD, TAPE or AUX).
Note: When TUNER is selected, display will show tuning frequency.
Example: Tuner FM mode
3. To turn the system OFF press the POWER button (8) or (30).
LCD (11) will go out and STANDBY indicator (7) will light.
CURRENT TIME SETTING
When connecting the system into AC mains for the first time, display shows "-- --:-- --". To set current
time perform the following:
1. In OFF mode, press and hold down the PROGRAM button (20) or (50) for several seconds, then
select 12-hr or 24-hr mode. (If the data is not entered within 10 seconds, display returns into initial con-
dition).
2. Press the TUNING/SKIP button (1) or (39)/(47) to select 12-hr or 24-hr mode.
3. Press the PROGRAM button (20) or (50) again, hour digits will start blinking. Then press the TUN-
ING/SKIP button (1) or (39)/(47) to set hours.
4. Press the PROGRAM button
(20) or (50) again, minute digits will start blinking. Then press the SKIP Forward or Backward button (1)
or (39)/(47) to set minutes.
5. Press the PROGRAM button (20) or (50) again to start timing.
6
ENGLISH
3492.qxd 20.10.2004 18:30 Page 6