Vitek VT-3492 - Инструкция (Страница 19)

CLEANING OF EXTERNAL SURFACES
• To avoid fire or electrical shock, unplug the system from electrical outlet before cleaning it.
• Be careful while cleaning the plastic parts. If the system's cabinet gets dusty, wipe it with the soft dry
fabric.
•To clear front panel from dust and fingerprints, wipe it with the soft fabric wetted in the light soap solu-
tion.
• Never use abrasive materials or polishing materials, because they can damage the external sur-
faces.
WARNING: DO NOT ALLOW WATER AND OTHER LIQUIDS TO GET INSIDE THE SYSTEM.
TROUBLE-SHOOTING
In the case you have encountered the troubles with operation of the system, please, acquaint yourself
with the recommendations below.
18
ENGLISH
TROUBLE POSSIBLE REASON SOLUTION
Noise or poor AM/FM receiver is not tuned Correct the station settings on
reception AM correctly the AM or FM bands
or FM bands
FM: Antenna is not spread at Fully spread the FM antenna
the full length.
AM: The system is Turn the body of the system
unsatisfactorily placed until the AM station reception
gets better.
FM STEREO FM STEREO mode is not on Choose the FM STEREO mode
indicator does not and tune up the antenna.
light up
No sound while listening TUNER mode is not switched on. Switch the TUNER mode on.
to the stations of AM
and FM bands
Volume level is too low. Increase the volume level.
No sound. TAPE mode is not switched on. Switch the TAPE mode on.
Volume level is too low. Increase the volume level.
The sound is distorted Magnetic heads are dirty. Clear the magnetic heads.
Tape playback speed Magnetic tape is old or Replace the cassette.
is not constant. damaged.
Pinch rollers or capstan Clean pinch rollers or
axis are dirty. capstan axis.
Cannot record. The safety tabs have been Seal the appropriate holes on
removed. the cassette with adhesive tape.
Distorted sound while Magnetic tape or magnetic Replace the cassette or clean
playback of the heads are dirty. the magnetic heads.
recorded tape.
3492.qxd 20.10.2004 18:30 Page 18