Vitek VT-3492 - Инструкция (Страница 18)

5. Press STOP/EJECT button (22) to stop the recording, and at this
time the playback of the disc will automatically stop.
Note:
1. If you want to listen to the newly recorded, switch on the tape
mode and rewind the tape.
2. To record from additional devices AUX, use the recommendation described above.
HOW TO LISTEN TO AND RECORD FROM ADDITIONAL DEVICES
You can listen to and record the sound programs from the additional devices with the aid of this system.
1. Switch the additional device into the assigned AUX input (24).
2. Press POWER button (8)/(30) to switch the system ON. The LCD
(11) will light. Choose the AUX mode with the FUNCTION button (4)
or (33).
3. To operate additional device, follow operating instructions for
this device.
CARE AND MAINTENANCE
COMPACT DISCS CARE
• Treat the discs carefully. Hold the discs only by its edges. Never touch the shining surface of the
discs.
• Do not attach pieces of the adhesive tape, stickers, etc. to the ornamental surface of the disc.
• Occasionally clear the disks with the soft (not woolen) dry fabric. Never use clearing sprays or anti-
static sprays to clean the discs. In the case of need, purchase the special preparation for compact
discs cleaning.
• If you observe pauses or failures during playback, the disc is possibly dirty or damaged (scratched).
• Wipe the discs from the center out towards the edge. Do not wipe in a circular motion.
• To remove a disc from its storage case, press down on the center of the case and lift the disc out,
holding it carefully by the edges.
• Fingerprints and dust should be wiped from the surface of the disc with a soft cloth. Unlike conven-
tional records, compact discs have no groove to collect dust and microscopic debris, so gently wiping
them with a cloth should remove most of the particles.
MAGNETIC HEAD CLEANING
Magnetic head, pinch rollers and capstan axis require occasional cleaning. The small parts of metal
oxide are accumulated on the above-mentioned parts, cause the premature wear of the magnetic tape
and worsen the playback quality.
Switch the system OFF, press the STOP/EJECT button (22) to open the door of the cassette compart-
ment, and then press the PLAY button (22). Wipe the Magnetic head, pinch rollers and capstan axis with
the soft fabric or wad of cotton swab, wetted in
the isopropyl alcohol or special solution for clean-
ing the magnet heads.
Note: Avoid the contact of metal items with the
magnetic heads and do not use them for cleaning.
Keep the cleaning material from falling into tape
mechanism.
17
ENGLISH
CAPSTAN COTTON SWAB
PINCH ROLLER RECORD/PLAY HEAD
CAPSTAN AXIS COTTON SWAB
MAGNETIC HEAD PINCH ROLLER
3492.qxd 20.10.2004 18:30 Page 17