Vitek VT-3492 - Инструкция (Страница 11)

TUNER OPERATION
1. Press the POWER ON/OFF button (8) or (30) to turn on the unit. LCD display (11) will light up.
2. Press the FUNCTION button (4) or (33) and
select the TUNER mode.
Example: FM mode
3. Press the BAND button (5) or (48) to select AM (MW) or FM band.
4. With TUNER/SKIP/SEARCH button (1) or (39)/(47), tune to desired station. To start automatic
search, press and hold down one of the TUNER/SKIP/SEARCH buttons (1) or (39)/(47) until display
shows frequency corresponding to that of the desired station. The tuner will search stations with the
most strong signal. To select stations manually, press and release one of the TUNER/SKIP/SEARCH
buttons (1) or (39)/(47) repeatedly until display shows exact frequency of the desired station.
5. On completion of tuner operation, press the POWER button (8) or (30) to turn off the system.
RDS (Remote Data System)
RDS is broadcasting system for transmitting text information in FM band. The stations carrying RDS
transmit the title of the station or, for example, radio schedule. The data is displayed by means of multi-
function display. Furthermore, the tuner can find the station by specific title.
To search stations by programme type:
1. Press the REPEAT/PTY button (32) of the remote control unit, and display (11) will show Programme
Type Search mode (PTY SEL).
2. By pressing the TUNER/SKIP/SEARCH button (1) or (39)/(47) repeatedly, select desired programme
type. To start searching, press the REPEAT/PTY button (32).
3. When the station corresponding the programme type is found, then search will be stopped and dis-
play (11) will show the program name.
To view station carrying RDS:
When the station carrying RDS is found (Note: display (11) will show RDS symbol), press the RAN-
DOM/RDS button (49) of the remote control unit to view informational text transmitted (for example sta-
tion title, type of radio programmes, programme titles, traffic summary, current time etc.).
STORING PRESET STATIONS
Up to 10 FM and 10 AM (MW) stations can be stored in preset memory.
1. Press one of the TUNER/SKIP/SEARCH buttons
(1) or (39)/(47) and tune in a station to be stored as
a preset station.
2. Press the PROGRAM button (20) or (50) once.
3. By pressing one of the FOLDER UP/DN/M -
UP/DN buttons (14)/(15) or (44)/(45), set the sequential number for this station before storing it.
10
ENGLISH
3492.qxd 20.10.2004 18:30 Page 10