Beko OIE 22101 X - Инструкция (Страница 14)

Q Preparation
Tips for saving energy
The following information will help you
to use your appliance in an ecological
way, and to save energy:
• Use dark coloured or enamel
coated cookware in the oven since
the heat transmission will be better.
• While cooking your dishes,
perform a preheating operation if it
is advised in the user manual or
cooking instructions.
• Do not open the door of the oven
frequently during cooking.
• Try to cook more then one dish in
the oven at the same time
whenever possible. You can cook
by placing two cooking vessels
onto the wire grill.
• Cook more than one dish one after
another. The oven will already be
hot.
• You can save energy by switching
off your oven a few minutes before
the end of the cooking time. Do
not open the oven door.
• Defrost frozen dishes before
cooking them.
Initial operation
First cleaning of the appliance
m The surface may get damaged by
some detergents or cleaning
materials.
Do not use aggressive
detergents, cleaning
powder/cream or any sharp
objects.
2. Wipe the surfaces of the appliance
with a damp cloth or sponge and
dry with a cloth.
Initial heating
Heat up the product for about 30
minutes and then switch it off. Thus,
any production residues or layers will
be burnt off and removed.
A Hot surfaces may cause burns!
Do not touch the hot surfaces of
the appliance. Use oven gloves.
Keep children away from the
appliance.
Electric oven
1. Take all baking trays and the wire
grill out of the oven.
2. Close the oven door.
3. Select Static position.
4. Select the highest grill power; See
How to use the electric oven,
page 15.
5. Operate the oven about 30 minutes.
6. Turn off your oven; See How to use
the electric oven, page 15
Grill oven
1. Take all baking trays and the wire
grill out of the oven.
2. Close the oven door.
3. Select the highest grill power; see
How to operate the grill, page 19.
4. Operate the oven about 30 minutes.
5. Turn off your grill; see How to
operate the grill, page 19
[0 Smell and smoke may emit
during first heating. Ensure that
the room is well ventilated.
1. Remove all packaging materials.
14 I EN