Error displays/messages – Инструкция по эксплуатации Sony CDX-S2270EE

Страница 13

Advertising
background image

13

Error displays/Messages

If these solutions do not help improve the
situation, consult your nearest Sony dealer.
If you take the unit to be repaired because of CD
playback trouble, bring the disc that was used at
the time the problem began.

Radio reception

The stations cannot be received.
The sound is hampered by noises.

• Connect a power aerial control lead (blue) or

accessory power supply lead (red) to the power
supply lead of a car’s aerial booster (only when
your car has built-in FM/AM aerial in the rear/
side glass).

• Check the connection of the car aerial.
• The auto aerial will not go up.

t Check the connection of the power aerial

control lead.

• Check the frequency.

Preset tuning is not possible.

• Store the correct frequency in the memory.
• The broadcast signal is too weak.

Automatic tuning is not possible.

• Setting of the local seek mode is not correct.

t Tuning stops too frequently:

Press (SENS) until “LOCAL-ON” appears.

t Tuning does not stop at a station:

Press (SENS) repeatedly until “MONO-
ON” or “MONO-OFF” (FM), or “LOCAL-
OFF” (AM) appears.

• The broadcast signal is too weak.

t Perform manual tuning.

During FM reception, the “ST” indication
flashes.

• Tune in the frequency accurately.
• The broadcast signal is too weak.

t Press (SENS) to set the monaural reception

mode to “MONO-ON.”

An FM programme broadcast in stereo is
heard in monaural.

The unit is in monaural reception mode.
t Press (SENS) until “MONO-OFF” appears.

ERROR

• The disc is dirty or inserted upside down.

t Clean or insert the disc correctly.

• The disc cannot play because of some problem.

t Insert another disc.

FAILURE

The speaker/amplifier connection is incorrect.
t See the supplied installation/connections

manual to check the connection.

L.SEEK +/–

The local seek mode is on during automatic
tuning.

NO ID3

ID3 tag information is not written in the MP3
file.

NO INFO

Text information is not written in the ATRAC3/
ATRAC3plus file.

NO MUSIC

The disc is not a music file.
t Insert a music CD.

NO NAME

A track/group/disc name is not written in the
track.

OFFSET

There may be an internal malfunction.
t Check the connection. If the error indication

remains on in the display, consult your
nearest Sony dealer.

READ

The unit is reading all track and group
information on the disc.
t Wait until reading is complete and playback

starts automatically. Depending on the disc
structure, it may take more than a minute.

RESET

The unit cannot be operated because of some
problem.
t Press the RESET button (page 4).

” or “

During fast-forward or reverse, you have reached
the beginning or the end of the disc and you
cannot go any further.

The character cannot be displayed with the unit.

Advertising
Эта инструкция подходит к следующим моделям: