Beko CS 58000 - Инструкция (Страница 53)

Release all the buttons and the timer will revert bock to the time
of day.
The A symbol will remain lit to signify that an automatic cooking
programme has been set. The
q
symbol will go out.
When the auto cook programme starts the symbol will
then light up again.
Step 7 Turn the oven control to the required temperature.
At the end of the cook period the A symbol
*
15.00
will flash and an intermittent bleeping
~" sound will be heard. The ^ symbol will
n O n O n bleeping souna will continue
Q ^ ^ for several minutes unless cancelled (see
Step 6). The A symbol will continue to flash
until the timer is returned to manual
operation (see below).
Step 8 Press the iffj cook period button to cancel the
bleeping sound.
Step 9 Turn the oven control to the OFF position.
Step 10 Press the jffj cook period and
tsiot
end time
buttons together to return the oven to manual operation. The
A symbol will go out and the ^ symbol will light up.
Notes:
When cooking automatically the cook period can be
checked at any time by simply pressing the jffj cook
period button and the TSiOT end time button.
To cancel the auto cooking programme before or after auto
cooking starts, press the jffj cook period and'^T end
time buttons together. This will return the cooker to manual
operation.
(b) To set the timer to switch ON immediately and
OFF automatically after a set cook period.
Step 1 Check that the correct time of day is set. If not follow
instructions for setting the time of day.
Step 2 Place food onto the correct shelf position in the oven
and close the oven door.
Step 3 Turn the oven control to the required temperature.
Step 4 Press and hold the iffj cook period button, the
display will read 0.00 and the symbol will light up.
With the cook period button still held set the required cook
period using the "+" and " buttons the A symbol will light
up. e.g. 1 hour 30 minutes.
Note: The cook period is the length of time the food requires
to cook.
19