Beko OIM 25501 X - Инструкция (Страница 30)

4 Pin
5 Pin housing
6 Metai Frame
• • Place the spade at the position
indicated in the diagram and push
in the direction indicated to
remove the glass.
• In order to re-fit the glass, place
the lower side of the glass to the
plastic housings. Push the glass
against the metal frame on the
upper side to secure the pins to
the housing.
Replacing the oven lamp
A Hot surfaces may cause burns!
Make sure that the appliance is
switched off and cooled down in
order to avoid the risk of an
electrical shock.
The oven lamp is a special heat-
resisting (T 300 °C) electric light bulb;
see
Technical specifications, page 5.
Oven lamps can be obtained from a
good local electrical store.
m Position of lamp may vary from
diagram.
1. Switch off the appliance at the
mains.
2. Unscrew glass cover by turning
anti-clockwise.
3. Unscrew oven lamp by turning anti­
clockwise and replace it with new
one.
4. Refit the glass cover.
1. Switch off the current.
2. Remove the side racks as
explained, see Cleaning the oven,
page 28.
3. Lift glass cover with a screwdriver.
4. Unscrew oven lamp and replace it
by a new one.
5. Insert glass cover and side racks
again.
30 I EN